Search results

  1. J

    2005 Key Won't Program

    I think I saw a max of 8 keys posted somewhere, don't know if the programmed ones can be cleared from memory or not. Is she losing the keys?
  2. J

    Fuel Pump Recommendation for a 2004 KJ 3.7

    It was actually a Delphi unit Since yours is a 2004 the part number is different from my 2006. I might be replacing mine again since it is close to 100k on it. I had the electric fuel pump on my outboard motor lock up after 10 years rockauto.com showed 1 Delphi pump in stock for the 2004...
  3. J

    Fuel Pump Recommendation for a 2004 KJ 3.7

    My Delco from the linked thread is still going, close to 100k miles on it
  4. J

    AC Compressor Intermittent Spinning

    Only about the outside 1/4 of the pulley should turn all the time, when the clutch engages, the inner part should spin also. I just looked at my 2006
  5. J

    Replacing upper control arms

    You will need a 18mm deep socket the bolt head has a flag on it so you don't need 2 wrenches. Just hope none of the bolts are rusted like my rear drivers side was as I had to cut that one out
  6. J

    Private message

    You just posted to their profile today, give it a day or so before sending a PM, they might be online sometime before tomorrow if they get email alerts to profile messages
  7. J

    What did you do to your jeep today?

    I finally got my drivers side UCA replaced, took about an hour with a small hacksaw and a sawzall with carbide blades to get the rear bolt cut off. After getting it cut out it looked like the bolt on the rear was a press fit and then rusted on the bolt head side. The passenger side was really...
  8. J

    Lower ball joint

    It isn't terrible to remove with a u joint/ball joint tool, a bit of a pain to press the new one in with the standard tool due to the length of the new ball joint. There are videos around. Mine broke on my 2006 back in October and I replaced it in my driveway. If the threaded part of the ball...
  9. J

    What did you do to your jeep today?

    Just get a subsonic pellet rifle, much cheaper, just as effective without a 6 month wait
  10. J

    KK Rock Sliders

    Looks a lot like the Lincoln I bought a long time ago, worked good on light steel
  11. J

    What did you do to your jeep today?

    And if they do leak, add oil before they quit leaking
  12. J

    WANTED: Passenger power window regulator

    I bought the A-Premium one from Amazon to replace the drivers side on my 2006($57). It makes it easier if you remove the bolts before removing the old or installing the new one as there isn't much extra space in the door
  13. J

    Adding rear power outlet

    Almost sounds like a spam bot response using ChatGPT Must be a KK as my KJ has constant power to the power outlet in the dash as I have left my phone in it to charge up
  14. J

    Tires or what ?

    I would avoid the Firestone Winterforce 2 as I have had them for a few months and they are garbage on snow, must be the worst tire ever with the 3MS snow rating as the Hankook Dynapro I had were really good
  15. J

    Front LCA boot / ball joint replacement

    It may help removal by cutting the threaded portion of the old ball joint off with a sawzall or angle grinder with a cutoff disc. I would have had an easier time with mine if my ball joint/u joint press was 2 inches longer
  16. J

    Dash lights go out when dome lights are off...what!?!

    You might want to find a salvage yard and grab a multifunction switch from another Liberty
  17. J

    4WD lever not working

    Block the wheels and put the transmission in neutral and see if the lever will move then
  18. J

    4WD lever not working

    The transmission has nothing to do with it. It all depends on whether the transfer case has the full time 4x4 option. I have the 2006 3.7 L with automatic transmission and I don't have the selec trac full time 4x4.
  19. J

    Hello from Georgia!

    Another Renegade owner, at least you shouldn't had many issues replacing the upper control arms being in Georgia. The rear bolts on mine were rusted into the bushings, the one came loose after keeping it soaked in penetrating oil but the drivers side still won't budge. Last Sunday I decided to...
  20. J

    What did you do to your jeep today?

    I got a package from Amazon with my Moog inner and outer tie rods and I am beyond unhappy with the left side outer Am I supposed to drill and tap it myself?

Random media

Initial weight test, approx 60lbs.
4941.jpg
comparison
3 d-cell Maglite mounted to bottom of cargo rack.
Jeep2
IMG 0512
1734.jpg
Jeep at Camp
image need to paint and make mounts for tank strapes

Latest posts

Members online

Total: 796 (members: 3, guests: 793)
Top