Search results

  1. DadOSix

    I've spun bearings on every 3.7 I've owned..

    Yup!
  2. DadOSix

    Steering rack bushing replacement help

    https://creative-steel.com/shop/jeep/kj-liberty/02-07-jeep-liberty-kj-polyurethane-steering-rack-bushings/
  3. DadOSix

    Manifold Absolute Pressure Sensor Connector

    I dont know if Napa has everything, but I was able to source some jeep connectors as a special order from them in the Belkin parts line. 2 for my chevy cruze and a jeep bit.
  4. DadOSix

    2003 KJ 3.7L Spark Plug experimentation

    Ouch!
  5. DadOSix

    I've spun bearings on every 3.7 I've owned..

    every 3.7 he owned (2) had issues. Hmm. Mine have other issues as we all have. I recall when i bought my 04 and thought there were engine issues. I could not rev up and was then unaware of the over rev limiter (governor). I love these little beasties!
  6. DadOSix

    Steering rack bushing replacement help

    Got me a set of those plastic ones that I need to get into the 04. Might be a good weekend for it.
  7. DadOSix

    I've spun bearings on every 3.7 I've owned..

    Seems at though @3.7Mech has left the chat. 2 messages on 1/3/25 and not seen since.
  8. DadOSix

    2005 liberty- Overheating

    Any HOAT coolant will be fine. I use Zerex g-05
  9. DadOSix

    Alarm problem.

    1 further idea. If your jeep has the evic (overhead console) the relearn procedure is different.
  10. DadOSix

    Belt pulleys

    That looks about right and much cheaper than the whole tensioner. Mine had a bad bearing on the grooved wheel, and a bad PS pump. After replacing those, it sounds like a whole different jeep. Before, I would have sworn the engine sounded like a harvesting machine for a farm.
  11. DadOSix

    Alarm problem.

    Post in thread 'Anti thief reset help' https://www.jeepkj.com/threads/anti-thief-reset-help.80165/post-806110
  12. DadOSix

    What did you do to your jeep today?

    Gotta love it when you already have your parts 'in stock'. Just did 06 front end work from accumulated finds like that.
  13. DadOSix

    Escaped Rocker Arms.

    You may find a stuck or collapsed lifter (lash adjuster) on each of the loose rockers. Ddpending on your maintenance habits , and those of any previous owners, there is likely varnish or gum in a collapsed one. Newer engines had rockers with smaller holes at the push rod end to force more...
  14. DadOSix

    Ac compressor/bearing

    Thread 'KJ 3.7l A/C Bypass - is there a consensus on belt size?' https://www.jeepkj.com/threads/kj-3-7l-a-c-bypass-is-there-a-consensus-on-belt-size.79630/ Start of a good thread walking you thru the belt.
  15. DadOSix

    05 KJ Cat codes

    If you do decide to do O2 sensors - start with just the upstream ones. Seems as they get the most work. Also, most gurus on here recommend the OEM sensors with NTK/NGK as acceptable. If you are new to these old KJ’s, they are fraught with electrical gremlins. A - they are old and have brittle...
  16. DadOSix

    RLE Trans downshift issue

    Don’t forget to add in #5 - lower control arm bushings. These are replaced under a recall, but do not last forever. When these go bad, the jeep is all over the road with a pronounced sway - one way on acceleration, opposite way on deceleration. My 04 had been done before, but when Son #4...
  17. DadOSix

    Are non-ABS front hubs/bearings interchangeable, or are they left/right specific?

    Only difference SHOULD be the direction of the ABS cable (how it comes off the hub to lead back to the jeep)
  18. DadOSix

    KJ 2006 3.7L Engine Temperature Slightly Low

    I don’t see a problem there. Those are not the most accurate gages. I have an IR temp gun that I use when I want to know for real. Has a lot of uses. Block temp. Rotor temp - when you are looking for a caliper that hangs up once in a while. Why do you think it is low?
  19. DadOSix

    Alternator

    Does this help? Post in thread 'Tipm to alternators has extra wire' https://www.jeepkj.com/threads/tipm-to-alternators-has-extra-wire.81016/post-813413
  20. DadOSix

    Coolant leak

    Thanks for the update. I wager if you still have the old core and a way to put a bit of air pressure to in, that you will find the leak quickly. Those hose connections are outside the box, so I still think bad core. Specifically around the seam where the header attaches to the finned section.

Random media

5288.jpg
Bagshot no 13
After Second Wash
scottpatent2
Euro classic
Jeep Dash Night View
DSCN9165
6
Beast.

Latest posts

Members online

Total: 656 (members: 2, guests: 654)
Top