Recent content by Xterra4x4

I have a code reade

I had a bad MAP sensor (sits between A/C in the front on intake manifold) was running bad spitting out different codes, good luck

I have a 2004 4x4 liberty, replaced the ****** with rebuilt one, just an idea I moved trans cooler up into the airflow, as old layout put the cooler below the bumper out of the airflow. After my ****** ran 30 degrees cooler

Have you used a good fuel injector cleaner? Like Chevron/techron?

What ype of fluid is it leaking?

Your rig sounds lifted to! Did you do it or shop and what parts?

Dorman part #946386 rear driveshaft cost about $700. you could save and remove driveshaft and have ujoints replaced!

On my 2004 the front drive shaft needs to be rebuilt, maybe send yours out! You can drive without it.

Have good experience from Rockauto buying, I've replace my Liberty Renegade ujoints once, bought them from auto zone and beat them out,made jig out of 2x6 drilled hole in 2x6 sat there and beat them out, or pay a driveshaft shop $100, goodluck

Snow and water is a killer of bearings and u-joints. If you need to buy parts I use Rockauto for most all my parts, it give you many price option to choose from, and I'm assuming you have no garage to work on cars in Ontario, Canada, my home country by the way. Born in Toronto, rasied up in...

Good luck on yours, with what ever you do!

Follow the lines, they appear to be lines to the heater-core, transmission lines run between ****** along oil pan to the front of the motor,then to ****** cooler!

I've done my own maintainance work on all of my 4x4s, the only way I now it done right, My Lib came from the Portland , Ore. area and u-joints and bearing go first. My lib has 162k bought with 136k and did a lot of work. New radiator-hoses-water pump-resivoir, new heater-core, new automatic...

Wasn't sure if 2009 is vacuum or electric? My 2004 is vacuum.

How many miles are on your Lib? Also do you do your own mechanical work?Lastly check the U-joints!