seafish's latest activity
-
SI’m undecided about what, if anything, I’m going to do. That gap looks odd and unfinished which is why I posted originally, asking if...
-
Sseafish replied to the thread Question about windshield seal.Not that concerned about it, though of course I was the person who actually did use black exterior grade 100% silicone caulking to fill...
-
Sseafish replied to the thread Question about windshield seal.As always … your car = your money = your choice. Personally I am not worried about that all… all the silicone that I applied is...
-
Sseafish replied to the thread Question about windshield seal.Bought my 2005 used and it had a piece of moulding there that was starting to come unglued at one end and flap around at highway speed...
-
Sseafish replied to the thread Question about windshield seal.It was a regular caulking tube of outdoor 100% silicone window and door (exterior)caulking IiRC it took almost the whole tube to fill...
-
-
Sseafish replied to the thread Question about windshield seal.There is a moulding piece that fills that space, but I dont know if it is still available it or if you could find one in good shape at a...
-
SInstalled my logging road radio yesterday - tucked it away in the center console - didn't want it just sitting on the console next to...
-
Sseafish replied to the thread Need help....Can't get my thermostat off.IIRC it helps to remove the heatshield, but it CAN be done by itself. Rathjer then a wobbler, Its better to come straight in on it with...
-
S^^^ If it were me I think I would give this a shot. The ball joint should have a snap ring that would prevent it from coming out, if it...
-
Sseafish replied to the thread Lower ball joint loose in knuckle.Yes it can still apply though I’m sure Others can correct me if they feel differently IMO there is nothing to lose by trying this …...
-
Sseafish replied to the thread Lower ball joint loose in knuckle.Before replacing it, you could try "dapping" the existing LCA socket with a cold chisel. Dapping involves punching a sharp, hard...
-
SCheck out this stuff. Kinda like split loom but not brittle. Link
-
Sseafish replied to the thread Changed starter in 06 KJ and it still wont start.Hopefully, you knew to disconnect the battery ground before doing ANY of the electrical work. PLEASE be sure to do that, before...
-
Sseafish replied to the thread Changed starter in 06 KJ and it still wont start.A few questions and a couple possible solution for you Did the new starter work at all out of the box? Is it OEM or Amazon aftermarket...
