Recent content by Ruby

Why will the wheel spacers make the rubbing worse? Do the 245s only rub along the pinch weld then?

Thanks for the help guys

Ya so then my question is, are the losses large enough that I'd want the thinner tire? Or are we talking something small enough I won't notice.

Ya I know, but they both broke free on the highway while my fenders were missing (also had broken off on the highway previously) and one got shredded and the other was half ruined so I decided to clean it out well and give it a good thick coating of rust protector. Plus at this point I've...

So then what broke? Same part in all 3 scenarios?

Oh and the wheels are the ones that came from the factory, as far as I've been told, and current tires are 230 75 r16.

I tried looking for this already, and maybe I'm bad at it, but I haven't found this question quite yet. Looking for experience from people who have used one or both tire sizes offroad. Looking to see how worth it the 245 is over the 235 in the real world. I'm settled on getting LT tires with a...

Um not lucky, I just buy appropriately rated gear. I believe without googling the numbers that hitch pins generaly have over a 10,000 lb sheer rating, and I definitely know grade 8 bolts of similar sizes blow that out of the water if you want to be extra safe. As for my hitch tray that my winch...

I use the curt front reciever with a winch mounted to a plate so it can attach to the front or rear. Winch is rated for 9,500 and I believe the curt hitch is rated 9,000 in a straight line pull. I believe libertys only weigh 4,000 to 4,500 so your good on the old double rule. I've used my winch...

My bad for never replying to this but the nuts were welded on. Ended up being nice and easy, thank you guys!

I had another thread about the rocky road lift, and I was very well persuaded not to take them. In an effort to find another source for all the lift parts has anyone heard of DPG Offroad? I don't have the ability to assemble the springs and shocks and so I'm looking for a place that can send...

Fingers crossed. I tackle it tomorrow.

I'm looking at how to put on the gas tank skid plate and I'm wondering how the heck you get the bolts on and off. 3 bolts, two badly placed access holes. Am I missing something? Is there some special tool? Obviously someone got a hitch mounted to this before i got the vehicle so its doable. I...

Nope. Just no bumper, it got ripped apart on several different mountain roads. I also just like the open wheel look the 2005 flares give you.

I have a single drivers side 2005 renegade fender flare I do not need. (Long story short I lost the passenger side down the highway) I have recently found a new pair of front rivited fender flares and as long as they come in fine I won't need the extra drivers side flare anymore. I'm wondering...