Recent content by Masterbrewer

  1. M

    Liberty down after flat tow

    My T-case was in neutral and my transmission was in neutral also. When I got home I put the T-case in 2 wheel drive and my transmission in park. I started the car and put it in drive. I had no movement at all I tried all T-case positions and all transmission positions too. It would not move at...
  2. M

    Liberty down after flat tow

    Your transfer case has to have a neutral. The NP242 has neutral. I’m not sure if the NP 231 does. When the T-case is in neutral the wheels turn, the gears in both diffs turn as do the drive shafts and some parts in the T-case but it stops there. No motion is passed on to the transmission, so I...
  3. M

    Liberty down after flat tow

    When shifting the T-case it feels like it’s connected but I will definitely check it out to be sure, thanks.
  4. M

    2005 Liberty Jeep Limited

    Actually the main reason for diesel costing more was when the EPA required sulfur be removed from diesel. It added extra steps to the refining. This increased the cost and decreased the amount of energy in the fuel. I didn’t know this either so I asked my son who was involved in setting up...
  5. M

    Liberty down after flat tow

    After getting home from flat towing my Liberty with the transfer case in neutral it won’t move in any gear (auto trans) or any transfer case position. I was wondering if the problem is with the transmission or the transfer case. My question is can the transfer case break so that you have no...
  6. M

    2003 Liberty 3.7L sport, Reman engine from Tri-Star, p0304 code

    I assume it was but we couldn’t know that for sure as the whole head was rebuilt. After the head was reinstalled he never did get the code again and it’s been about a year since it was completed.
  7. M

    2003 Liberty 3.7L sport, Reman engine from Tri-Star, p0304 code

    My friend was pulling the same misfire code. The same cylinder would log a misfire at around 50 miles of driving. After everything else was tried the head was sent to the machine shop to be redone. After the head was replaced he never had the misfire code again. I only bring this up because you...

Latest posts

Members online

No members online now.
Top