LibertyTC's latest activity
-
Just did a trans service yesterday. It had a mopar spin on filter still in the RFE45, but the pan filter had been changed before. I used... -
Quick update. After getting the rocker reinstalled I told her we were going to reassemble the engine before we pull the head and see how...
-
Thanks for the reply. We got it most of the way torn down today. They exhaust rocker arm was off on #6 cylinder. Not hard to figure out...
-
LibertyTC replied to the thread Newbie Libby Owner…REALLY need alot of help pls.Is the Jeep running ok ? The NGK spark plugs are fairly easy to replace.
-
LibertyTC reacted to blonde_in_mn's post in the thread Newbie Libby Owner…REALLY need alot of help pls with
Like.
@LibertyTC Thank you so very much for responding and your help. I greatly appreciate it! I actually wanted to pm you but I’m new to... -
LibertyTC replied to the thread Newbie Libby Owner…REALLY need alot of help pls.Use NGK ZFR6F-11G spark plugs I used the STANDARD brand of coil packs which fit perfectly.
-
-
you can look up your vin here and it will give you the "package" listing/ build sheet at the bottom of what all it came with...
-
just running standard upper arms, the lift was done prior to all other new parts and there was no clunk previously, the clevis bolts did...
-
LibertyTC replied to the thread chasing the elusive front end clunk.The KJ will handle so much better with the 4.5's and offer a better alignment.
-
LibertyTC replied to the thread chasing the elusive front end clunk.For the Upper control arms, are you using Jeepin by Al's 4.5's ?
-
-
LibertyTC replied to the thread Turn signal is staying on/ isn’t flashing.I think Ive seen this before. I wonder if it may be possible that corrosion is present in the tiny side marker turn bulb socket hmmm..
-
LibertyTC reacted to ron.dittmer's post in the thread 2006 Liberty Sport 4x4 - Total Parking Brake Rebuild For $68 with Like.
TaDa! All done. I followed my own advise. After I filled the differential with gear oil, while still on jack stands, I started the...
-
LibertyTC reacted to ron.dittmer's post in the thread 2006 Liberty Sport 4x4 - Total Parking Brake Rebuild For $68 with Like.
Since the paint was handy, I painted the hubs & raw metal axle seals, mounted the caliper brackets, painted the related nuts and stems...
-
LibertyTC reacted to ron.dittmer's post in the thread 2006 Liberty Sport 4x4 - Total Parking Brake Rebuild For $68 with Like.
Now being deep in this project, I see that you are correct. I noted the backing plates were riveted on, not screwed on. I am shocked...
-
Hi, I'm from Italy, Rieti, I'm just getting to know with my father-in-law's 2.8 CRD. So I'm a real beginner: be understanding with me...
