KJowner's latest activity
-
KJowner replied to the thread 2007 lift recommendation help.H&R springs are reasonably priced and good quality, check all the ball joints and bushes while it's in bits and it will need an... -
KJowner reacted to David A. Warr's post in the thread Rusted E16 external torx bolts for wheel bearing. with
Like.
Yes I had to remove the knuckle. I skipped some work. I removed a knuckle from a parts Jeep that I own that was totally rusted out... -
KJowner replied to the thread P0402 after cleaning the air intake.Check for a boost leak from the air hoses, that would mess up MAF readings. You could also speak to your fellow Italian
-
-
Unfortunately, I think disabling the EGR is not an option since I'm in Italy. Every two years we have the car revision and they control...
-
So, that idiotic thing is a one-time use part. When you get it, don't manipulate it. Just install it, and it will work. If you move the...
-
KJowner replied to the thread P0402 after cleaning the air intake.The diesel doesn't have a throttle, the butterfly flap is used to restrict inlet air by the ecu to reduce emissions. A blocked MAP can...
-
Update: Got an aftermarket third brake light in the mail. Opened the box and saw it won't plug into the factory plug. I'll connect...
-
KJowner reacted to u2slow's post in the thread Rusted E16 external torx bolts for wheel bearing. with Like.
Taking the knuckle off is not a terrible job. After removing the balljoint nut, a swift hammer-blow should do it. The lower control arm...
-
KJowner reacted to DadOSix's post in the thread Rusted E16 external torx bolts for wheel bearing. with Like.
Occasionally, you can get an e-torx out with a similar sized 6 point socket. Might have to go SAE if a metric will not fit. 6 point...
-
KJowner reacted to David A. Warr's post in the thread Rusted E16 external torx bolts for wheel bearing. with Like.
Yes I suppose with the axle removed. Hadn’t considered that. Thanks again.
-
KJowner replied to the thread Rusted E16 external torx bolts for wheel bearing..You can weld a bolt onto the torx head, there's space for that. I haven't had the pleasure of changing one yet.
-
-
Kid and I were able finish the work. Now the ruttin brake lights won't go off.... Got the switch in my lap, trying to figure out why it...
-
I'm in similar situation... Be aware the 4.10 R&P set alone is about 800 bucks for the front diff. It's a proprietary pinion, and I...
-
Thank you, @burntkat. I am waffling between 1) just putting my suspension back together, 2) putting in the limited slip but keeping the...
-
Definitely zip ties for the quick, neat, easy and durable “redneck win” !!! You can feel good about them cuz at least you’re NOT using...
