KJowner's latest activity
-
KJowner reacted to CherokeeLiberty's post in the thread What did you do to your jeep today? with
Haha.
You, sir, are correct. I still have my old carburated Mercury and the garden tractor when I need my cable fix. -
KJowner replied to the thread Charging issue.Hopefully that will sort it, the ECU is coded so a swap out isn't simple, often easier to get the original one repaired or cloned.
-
Yes, I tested these when I worked at Chrysler and then I never knew anything about the charging system and I worked in emissions and...
-
KJowner replied to the thread 06 liberty won't start.Might be a dying starter solenoid, time to get the multi meter out and see if the key is putting a supply to the solenoid.
-
KJowner replied to the thread 2006 Liberty Sport 4x4 - Total Parking Brake Rebuild For $68.There were 2 different brake systems available for the rear of the KJ, one was a large drum brake like the earlier Jeep XJ, the other...
-
KJowner replied to the thread 06 liberty won't start.Manual or auto? Manual has the clutch interlock switch that can fail.
-
Winter parking restrictions just ended so I've got until November before parking becomes a problem again
-
KJowner replied to the thread Knocking Noise and Metal in Oil.If you do go down the route if scrapping it if you have space to keep the whole Jeep for a while, you are sitting on a parts goldmine. I...
-
Yeah I'll have to decide if im gonna do that because my other option is to just buy another jeep with the same money, the other main...
-
KJowner replied to the thread Knocking Noise and Metal in Oil.Knocked the rocker off and broke something in the head that dropped into the sump would be my guess. Pop the valve cover off and see...
-
KJowner replied to the thread Knocking Noise and Metal in Oil.Probably a dropped valve seat, would explain the heavy breathing accompanying the misfire, the valve will be stuck open. A second hand...
-
It’s got a 4” JBA adjust a strut lift kit from back in the day. The actual height is probably nearer to 3.5” by now.
-
To anyone who may find this thread down the road, "Module Master" at modulemaster dot com will do it. I don't know if that is who op...
-
KJowner replied to the thread Knocking Noise and Metal in Oil.Sounds like a misfire, along with the tapping, noise is very top end so I wouldn't condem it just yet, definitely time to pull the heads...
-
My guess would also be bad new lower control arms or maybe the mounting bracket holes are egged out
