KJowner's latest activity
-
Are your Trac-Lok's stuck? Another possibility is that one of the brakes is stuck on. -
Any bolt holes egged out?
-
KJowner replied to the thread Charging issue.Yes, the alternator field is controlled by the ECU, you should only fit the correct alternator for the Jeep. If you have bought the...
-
KJowner replied to the thread Broken sway bar link bolt.How much have you lifted it?
-
Today the sway bar assembly came together! I am still waiting for a new Mopar sway bar to be delivered, so I installed the rusty one...
-
KJowner replied to the thread lifting back to stock height..It would be much nicer to drive if you lifted it level instead of like a powerboat.
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.Really strange, I think your right about setting up the camera to see what's happening, only other thing that comes to mind is faulty...
-
Checked front end. Everything looks good visually. No play. No shake or shimmy in steering. Jeep is solid, no rust or I would think...
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.Check the front lower ball joint and track rod ends, there isn't much else at the back to look at!
-
KJowner replied to the thread 2004 Jeep Liberty Rear End Issue.That's strange, you have done the usual causes of rear end steering. Was there no improvement at all with replacement lower arms? Try...
-
KJowner replied to the thread New to jeep..Try unplugging the tailgate handle, there is a microswitch in there that unlatches the glass, it is known to fail and make the glass pop...
-
KJowner replied to the thread Hello from Italy.Welcome, the 2.8 is a good engine, tough and simple
-
Hi, I'm from Italy, Rieti, I'm just getting to know with my father-in-law's 2.8 CRD. So I'm a real beginner: be understanding with me...
-
My 2002 KJ Limited (3.7) is lifted 2". I needed two new tires, and ordered 235/70/16 KO2's to match the two good ones. The next day, the...
-
KJowner replied to the thread 235/70/16 Front + 265/75/16 Rear?.They aren't massively different in size & in 4x2 it shouldn't make any difference but I wouldn't use 4x4 until you have a matched set...
-
