-
-
GGeralt replied to the thread Fuel regulator buzzing.Yes, The buzz is present with the ignition on and the engine off. I can't hear anything when the engine is running, The diesel sound is...
-
GGeralt replied to the thread Fuel regulator buzzing.I removed the fuel filter and applied black engine gasket sealant. There are no more bubbles, but the buzzing is still there, and the...
-
GGeralt replied to the thread Fuel regulator buzzing.Very good, I'll look into it.
-
GI took my filter off, stripped it, cleaned it and put it back together with a little bit of sealant on all the threads and heavy grease...
-
GGeralt replied to the thread Fuel regulator buzzing.Fuel regulator behind the cp3 pump. Today I installed a low-pressure electric pump with transparent hoses, and there's a lot of air...
-
GCheap and good scanner don't often come up together, the cheapest way is to pay a garage to do the test. There is a thread on here about...
-
GWhen you say fuel regulator do you mean the one on the pump or the one on the rail? The one on the rail shouldn't be energised until the...
-
GThat's good
-
GGeralt replied to the thread Fuel regulator buzzing.Do you know a cheap scanner that is compatible with the 2003 Jeep 2.8 CRD?
-
GGeralt replied to the thread My 2003 KJ 2.8 CRD and its problems.Continued. Key reprogrammed, everything is fine. Everything works, even the alarm.
-
GGeralt replied to the thread Fuel regulator buzzing.The Jeep starts fine but stalls at idle or at a stop sign.If I accelerate above 1200 rpm, it doesn't stall.
-
GGeralt replied to the thread Fuel regulator buzzing.No, but I plugged another one into the socket and it was buzzing too. I checked the continuity of the wires between the PCM and the...
-
GGeralt replied to the thread 2005 Jeep Liberty CRD Won't Start - At first no hot start...now no start at all.There is the pump pressure regulator that vibrates
-
GGeralt replied to the thread 2005 Jeep Liberty CRD Won't Start - At first no hot start...now no start at all.He said look at the wires under the battery mounting Thanks
-
GHello everybody, My 2003 CRD export starts very well but turns off after 30s at idle, if I accelerate to 1700 rpm it does not cut out...
-
-
Loading…
-
Loading…
