Recent content by 02libby

Thanks for all of the input every one. For now it is running great and not over heating anymore. I will keep my eye on everything and let you know how it goes.

I have been watching it all day and I keep getting the same thing. Mechanical fan and electric fan are off, temp goes 1/4 way up the gage, mechanical comes on. Electric stays off, even at 1/2 way up. When I turn the ac on the electric fan turns on, turn off the ac the electric fan goes for about...

Hey guys. Got the new radiator installed with new water pump, belt tensioner, belt and thermostat. Running cool again. But I wanted to clarify from previous. In the HD setup, the mechanical fan comes on at operating temp and stays on. The electric fan only comes on when the ac pump comes on. So...

You guys are right and I agree. With the mechanical fan not turning on until 230 I wouldn’t see or notice any gains MPG. I will keep the 2 fan set up. New radiator arrives tomorrow. I will post back if it fixed the heating issue. Thanks for everyone’s input

I believe you’re right about the mechanical fan coming on at 230. The electric is a single speed and I see this one on mostly during summer months. Can’t really say I have noticed the mechanical one on until the over heating issue happened. I was curious about a MPG gain too if I delete it. I...

Yes I purchased the Mopar thermostat after reading about issues of other brands. That obviously wasn’t the issue. Shortly after I started getting a screeching sound from the water pump on cold mornings so started looking at that when I noticed a crack on the plastic tank of the radiator. I just...

I just don’t want to delete it and it be detrimental to the cooling. I am currently installing a new radiator and water pump. I had an overheating issue. Started by replacing the thermostat. Pump was making noise and I found a leak in the radiator tearing things down.

What is the purpose of 2 fans? It doesn’t seem like there are many Liberty’s that have this system. Can I delete the mechanical fan and keep the electric?

I did that. The old clutch disc was fine but both bearings were shot. The throw out bearing was making a ton of noise and the release bearing was apparently getting stuck. I am going to try and bring it to them on Saturday. We will see how it goes.

They replaced the clutch, throw-out bearing, release bearing, and resurfaced the fly wheel. Then they bled the clutch line. So I don't know what could be going on. The clutch feels good, grabs good. Drove it down there today and when I got there the noise stopped. Drove it home, and it...

Should I try the TPS (throttle position sensor) as well? A buddy of mine said that was the problem with his car, but he has a honda.

Yeah he took it off and resurfaced it. Would that affect the crankshaft sensor?

I tried taking off one of the two sensors behind the throttle on the intake and the star bit I was using broke!!! Those screws are torqued in there pretty good. How has anyone else taken these off? Also does anyone know what my idle speed should be? I remember it being around 750, but I...

Yes I will be stopped in neutral when it does this. The idle bounces around with nothing on as far as air conditioning. It does not bounce around fast either. It does it gradually. I am taking it back to the shop I had the clutch done at tomorrow to see if they can identify the noise. As...

2002 Liberty 5-speed 4x4 3.7L 126,000 miles Just had a clutch put in my 02 Liberty. It was making a weird squealing sound, like finger nails on a chalk board when I had my foot on the clutch, just not as loud. Turned out being bad bearings. Now, I notice when I am at a stop light after...