first&lastKJ
Full Access Member
Will any year KK clevis fit a KJ?
Who has done this?
I want the front higher. Currently at 21.5, 927's, 1/4" top plate.
Who has done this?
I want the front higher. Currently at 21.5, 927's, 1/4" top plate.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Will any year KK clevis fit a KJ?
Who has done this?
I want the front higher. Currently at 21.5, 927's, 1/4" top plate.
Any year KK will work, but have you priced them, even in junkyard ?
I have looked at them but never thought it was worth it in the long run I'd much rather do a 3/8 inch clevis
What front springs do you have ? Without the top plate you would be at 21.5 with 927s , with top plate you would be at 3 inches
If all you want is another 1/2”, then do a clevis lift. Just loosen the pinch bolt, pull the shock out 1/4”, retighten bolt. It’ll give you the 1/2”.
I just like the idea of a longer clevis. I think I can get a set pertty cheap from local junkyard. Bought some wheels, coil spring assemblies, belt tensioner and other small parts and they always give me really good prices.
I got the entire coil spring assemblies with clevis for $60.
Sorry, the coil spring assemblies were for our 02.
So I take it you don't like the kk clevis idea?
Have good isolaters ?
I installed the KK clevis forks. About 1/2" longer. I had to buy the whole strut tho. Wreckers around here sell them as an assembly.
I forget what year I asked for exactly. I just picked a 2008+ year and let Car-Part.com--Used Auto Parts Market tell me who had them locally. Some are alleged to be stamped steel (have seen pics). Mine, and the handful of KKs I've looked under were cast just like the KJ. Maybe a Canada thing?
I installed the KK clevis forks. About 1/2" longer. I had to buy the whole strut tho. Wreckers around here sell them as an assembly.
I forget what year I asked for exactly. I just picked a 2008+ year and let Car-Part.com--Used Auto Parts Market tell me who had them locally. Some are alleged to be stamped steel (have seen pics). Mine, and the handful of KKs I've looked under were cast just like the KJ. Maybe a Canada thing?