CV replacement parts list, missing anything?

[KJScott]

When I get and install my Tommudd lift and A arms from JBA I'm going to do my CVs. Although the boots aren't torn, seems like I have slop in the right side one, and a thumping noise starting at about 40mph, that increases with speed. Feels like its on the passenger floor. Front driveshaft seems solid, and boots are good.
My guess is the slop is possibly the intermediate shaft to CV.

So Tommudd and others, how does this list sound-
NMD 958355 right side NAPA CV Remfd
NMD 958354 left side NAPA CV Remfd
intermediate shaft Dana 30a from Automotivepartsunlt (ebay)
05066064AA snap ring qty 2 for intermediate shaft Mopar
05066067AA O ring for intermediate shaft Mopar

What about axle shaft seals, should they be done too?
Any other parts?

I also have Moog greaseable LBJs to install also.
Hopefully nothing will detonate on the front end before I do the install in several weeks.

 

[wheeee32]

Since you'll already have it all torn apart the seals wouldn't hurt to be done.

 

[KJScott]

That's what I am thinking wheeee32. Might as well.

Seems like the overwhelming silence of 75+ views to my original post means I have forgot nothing else.

 

[tommudd]

Sorry just saw it, snap rings come on the intermediate shaft or at least every one I have seen did .

 

[KJScott]

Thank you Tom. From reading the how-to's, sound like I don't need to open the diff cover, that the left CV and the Interm. shaft will pop out with encouragement after everything else is disconnected.

 

[tommudd]

Thank you Tom. From reading the how-to's, sound like I don't need to open the diff cover, that the left CV and the Interm. shaft will pop out with encouragement after everything else is disconnected.

No need to open the diff cover, just pull them both out, very easy to do really