Crankshaft position sensor problems

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jsy

New Member
Joined
Jan 30, 2022
Messages
9
Reaction score
0
Crankshaft sensor cam off in pieces. This is all I have left to get out so I can put the new one in but I cant get it out. The next step is to take out the catalytic converter. Which I really don't want to do. Any other ideas?
 

Attachments

  • 16612668098124384089527615604939.jpg
    16612668098124384089527615604939.jpg
    489.5 KB · Views: 11
  • 16612670171952175441332644469786.jpg
    16612670171952175441332644469786.jpg
    277.7 KB · Views: 10

JJ05KJ

New Member
Joined
Apr 1, 2021
Messages
4
Reaction score
2
You have to clean around the edge really good. What happened with mine, is I found there to be a lot of rust around the outer edge of the bore holding the sensor in there. If you can clean that well and maybe collapse the sensor body in on itself, you may be able to grab it with some needle nose. Make sure you spray it with some loosening fluid. This is no picnic, I feel for u.. good luck!
 
  • Like
Reactions: JRB

Latest posts

Members online

Top