Another Lift Kit Question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

streetsnake

Member
Joined
Jan 22, 2022
Messages
99
Reaction score
30
NOW.................................
when you get the coilovers shoved up in place start the two inside bolts on
Then position the clevis to where it should be headed in the right direction
Using two ratchet straps , attach one on each leg, then to the other side and then easily pull them into place
This is another area where people spend too much time on a simple task
and yes, ......it really work , wink wink
Oh and make sure your brake hose in inside/behind the spindle before bolting the ball joint up
Sorry...not following this one. LOL I'll have to read this when I'm looking at it. Hmmm
 

streetsnake

Member
Joined
Jan 22, 2022
Messages
99
Reaction score
30
Onto a new question as im getting close (hopefully) to finishing the lift. I noticed my muffler is on its last leg. I purchased a Gibson cat-back system but can decide on what catalytic converter system to get. Any thoughts or suggestions?
 

duderz7

Full Access Member
Joined
Jan 20, 2016
Messages
1,498
Reaction score
1,254
Location
Weiser, ID
I had this happen on my stock arms way back when and after trying all the tricks with no success I ordered jba's and cut the stud with and angle grinder.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
Onto a new question as im getting close (hopefully) to finishing the lift. I noticed my muffler is on its last leg. I purchased a Gibson cat-back system but can decide on what catalytic converter system to get. Any thoughts or suggestions?
Replacing the cats as well ? Why ?
Plus a lot of the replacement cats do not flow as well as stock MOPAR ones do
My 04 with over 233,000 miles still have OE cats and doing great
 

streetsnake

Member
Joined
Jan 22, 2022
Messages
99
Reaction score
30
Replacing the cats as well ? Why ?
Plus a lot of the replacement cats do not flow as well as stock MOPAR ones do
My 04 with over 233,000 miles still have OE cats and doing great
Gotcha, I was thinking it was a good idea to replace them after 100k or so. I'll keep it as is then. Thanks
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,418
Reaction score
2,671
Location
Philadelphia, PA
190K and still on my oem cats. Third or fourth muffler though! (Lots of city driving and PA salt.)
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
Gotcha, I was thinking it was a good idea to replace them after 100k or so. I'll keep it as is then. Thanks
If that is the case I need to change all 3 of mine out, all well over 100,000 miles LOL
But if having issues, then yes if no, run her
 

RonB

Member
Joined
Mar 25, 2019
Messages
30
Reaction score
6
Location
Florida
How many hockey pucks needed. I see OP mentioned 12 bit I assume 4? Finaly order springs looks like they are out of stock will see how long it takes.
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
How many hockey pucks needed. I see OP mentioned 12 bit I assume 4? Finaly order springs looks like they are out of stock will see how long it takes.
It all depends on amount of lift, what wheels / backspacing etc
IF
stock wheels , say 245-75-16 tires and 2.5 inches of lift then two per side ( 2 inches of bumpstop )
rule of thumb is an inch of bumpstop for every inch of lift

12 ??

what springs did you order / brand and number , what do you have up front ?
 

streetsnake

Member
Joined
Jan 22, 2022
Messages
99
Reaction score
30
It all depends on amount of lift, what wheels / backspacing etc
IF
stock wheels , say 245-75-16 tires and 2.5 inches of lift then two per side ( 2 inches of bumpstop )
rule of thumb is an inch of bumpstop for every inch of lift

12 ??

what springs did you order / brand and number , what do you have up front ?
No. I said I ordered 12. I have 8 to spare. LOL. If anyone needs any, just pay for shipping and I'll send you some. :)
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
Wow , ordered 12 , well you got spares now
most sporting goods stores have bins of singles
 

RonB

Member
Joined
Mar 25, 2019
Messages
30
Reaction score
6
Location
Florida
Just found a 4 pack on Amazon $9.99 free shipping. Probably cheaper than you would pay for shopping now days. Thanks for the offer.
 

streetsnake

Member
Joined
Jan 22, 2022
Messages
99
Reaction score
30
Just found a 4 pack on Amazon $9.99 free shipping. Probably cheaper than you would pay for shopping now days. Thanks for the offer.
No problem Yes, I was looking at a build list and misinterpreted it. Thought I needed twelve. Thought it was a bit much at the time but went ahead with it. LOL
 

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,517
Reaction score
3,462
Location
Bellevue NE
For reference: Howie’s Hockey Tape sells em 2$ a piece. Sells em as a 4pack on Scamazon too.
 

streetsnake

Member
Joined
Jan 22, 2022
Messages
99
Reaction score
30
Can anyone share a link with me for 2010 front sway bar bushings? The front is bigger than the rear. I thought I found the correct ones but when they came today, they were the same as the rear.
 

lfhoward

Wheel. Repair. Repeat.
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,418
Reaction score
2,671
Location
Philadelphia, PA
I found two part numbers for the front sway bar bushinngs for you in the 08 parts fiche. I don’t know what the difference between them is. They are not different left to right.

52125323AC
52125324AC
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,450
Reaction score
3,649
Location
Southeastern Ohio
Im finding that for the front as well, plus I have ran into that before
one is 22mm and another sway bar is 23
but oh well,.....carry on
 

Latest posts

Members online

Top