Search results

  1. SAString

    '02 New and used spare parts

    I sold my '02 Liberty 3.7 4WD. I now have spare parts that you may want: I have for sale: Four 1.25" Wheel Spacers (Brand: G2, Black Anodized) 2 OEM front tow hooks (gloss red with J-clip and bolt) New Transmission filter kit (auto 4WD) in the box Front Skid Pan (OEM) 6 new fuel injectors in...
  2. SAString

    How do i "Lower" the rear end?

    My KJ has an OME spring lift with Bilsteins and rides beautifully. But the rear is strangely about 1 1/2" higher than than the front. I suspect I'm getting some pinion-angle vibrations, due to the new rear drive shaft angle. I've added and maxed a JBA link (with little improvement) and using...
  3. SAString

    NP231J Transfer Case - Rework needed?

    I found a bit of play in my Transfer Case rear output shaft. Now I'm venturing into the internal guts of my KJs workings. Drained the Transfer case ( I used 30w synthetic last time) Pulled the rear shaft and boot Removed the Oil Slinger (PITA! Order a new one!) Chiseled out the seal (PITA...
  4. SAString

    High Idle Speed Fix

    If you suddenly have a high idle speed that won't go down to normal levels, ask yourself, "Did I disconnect my battery lately?" This had me baffled for several weeks. I replaced the IAC valve, checked for intake leaks etc. still ran too high (1500 rpm). Apparently, disconnecting the...
  5. SAString

    Intermediate shaft question

    I recently changed my passenger side CV axle. When I removed the old axle, I noticed the intermediate shaft did not have anything in the grove that is about 1/4" from the outside end. Is there supposed to be a clip or lock ring in that groove? Thanks for answers, pictures and part numbers...
  6. SAString

    OME Spring Lift and Pinion Angles

    Adding new Bilstein shocks and OME springs was the first investment I made in my '02 KJ Sport. Everything had aged and sagged below the recommended 19" overall height, so it was time. I followed all the recommendations of the members and decided on Bilstein 4600 shocks, with OME 927 springs...
  7. SAString

    Wits End! Should I sell my KJ?

    I've been working almost daily (after my day job and weekends) upgrading parts on the '02 Liberty. Mostly repairing the rust (successful) and chasing the elusive 50mph Vibration (unsuccessful). Thinking the vibes could be the tires, I just put new 245/70 R16 Destination AT's on it. After 7...
  8. SAString

    OEM upgrades, parts from later models that fit

    I know Chrysler Jeep made many changes and improvements to the KJ after it's introduction in 2002. Many in the areas of NVH (Noise, Vibration & Harshness). I'm specifically looking to see if the improved Motor mounts on the '06 3.7L will fit my '02? 52059227AB 2002 motor mount, L...
  9. SAString

    On a Mission: 50mph rumble

    Hi All: I'm new to the forum, as I just adopted the '02 Sport from my daughter. She got my '14 Cherokee for Graduation! Thanks for all the advice! This was a Michigan KJ, so lots of rust. 128K on the Odo. I've been dealing with the "50mph drone" that rumbles from 50 to 55mph. It stops...
Top