Search results

2002 3.7 Driving home the other night as i was pulling in the driveway there was a bunch of steam etc. I figured a blown hose. It turned out that the cap must have pressurized too much and popped. No blown hoses. leaking from the reservoir. I changed the heater core a couple years ago and it...

I have an 02 that is strictly a work car. It wears the inside edge of the tires very uneven compared to the rest. This is both sides. I am sure the springs need replaced. I'm not going to do that on this on this old thing. My question is can I or an alignment shop get the camber back close...

Can anyone help with a part number or source for the pigtail connector to the coil pack? Apparently a mouse liked the insulation and shredded one of mine. The local parts store says this is a 45$ part. Mine is a 2 wire connector on a 3.7 Thank you for your help

Son called and said it was smoking bad. He pulled over and raised the hood. Lots of oil around the back and on the firewall. There was also several large spots on the ground. I took the trailer today and hauled it home. The #6 coil had oil pooled up on top. I sprayed it off with brake cleaner...

Can any one point me in the right direction to find an kit for the above compressor? I have found and used a kit on an o6" 10SR15E compressor in the past I can still find those, but it says its only compatible with that compressor. Thank you

The radiator is 3 years old. New heater core and blend door actuator two years ago. I can hear the actuator cycling. The tank and cap was replaced with the heater core. Barely warm at best. On the throttle it would get a bit warmer, but coming to a stop back to barley warm. Some suggested...

I have an 02 That I have replaced the heater core and blend door within the last 2 years. The blower motor was not working and found the problem to be the connector to the motor. The blower motor resistor was also replaced to get all four speeds to work. All of those items seem to be functioning...

Can anyone help with a part number for a blower motor connector? The parts store did not show one today. I have tried to find one online tonight with no luck. There are several for the resistor, but I need the one for the motor itself. Thank you

Can anyone help with a part number for a blower motor connector? The parts store did not show one today. I have tried to find one online tonight with no luck. There are several for the resistor, but I need the one for the motor itself. Thank you

The blower does not operate on any of the four speeds. I replaced the resistor with a Durolast part from autozone a couple years ago. It still looks brand new. Is there a way to test it? I pulled the blower and it has plenty of power on 12v. I also checked and swapped relays under the hood...

When shifting from park to reverse on an 06' there is a grinding/whining noise. If I go to drive and back into reverse it does not happen. It is not every time but fairly consistent. Fluid is clean and the right color. It sounds like it is right under the shift lever. Any ideas on what to start...

We have an 06 with 150k miles. It has started having a couple issues that I don't think are related but I'm also not sure. Sometimes when shifting from park to reverse it sounds like its lightly grinding. Put it back in park and shift again it is ok. The shift handle does have some play in it. I...

I need to replace the bank 2 sensor 2 unit down stream. If I am correct the oem # is 56029049aa... which looks like it crosses to ngk 23159 . Some sites show it to be the incorrect part and some show it being correct. Anyone know or have experience with the correct part? Thank you for your help.

Kid just brought me her jeep.Home from college and I need to try to deal with this this weekend. Apparently it has struggled to start and or stay running the last week. Does have a CEL on. Oreilly's gave her the P0157 code which is an o2 sensor as far as I can tell. 155 k miles. Original Coil...

Kid was 2 hours from home and PS pump went out. Bearing was coming apart.She was blessed enough that People where she worked changed the pump not once but twice. The first new one last night leaked so they did it again today. Very lucky kid while at college! On the road home and just...

As- over elbows trying to get to the heater core and blend door motor. Doing both since I am there. Everything is free except the harness. Thought I would simply take the bolt out of the center of the block and unplug it. Bolts are free and I am not smart enough to get it unplugged. I dont see...

Not sure what the next step should be. All 4 motor speeds work. Vent selector changes as it should. Heater hoses are hot. Air is slightly warm but not hot at all. Coolant is full. Ac does not work so it does not change when switched from hot to cold. I can try to flush the heater core before I...

I have puddle of oil on the driver side intake to the right of the first injector. Valve cover gaskets are new and are dry around the edges on both sides. I am not positive that is where the leak is , but the oil has puddled there. Any ideas on what the next thing to do is? I have not ever had...

Sorry i realize this is a liberty group but I my 18yrd just bought an 08 commander to leave for college with in a couple weeks. I feel like a fool and should have ask more question and educated myself more. We drove several hours and the story was it had engine, tranny and transfer case replaced...

Daughters 06 does not start or run without using the throttle for a few minutes. It only does it on colder damp days on the initial start. It is fine through the rest of the day and runs fine down the road. is there a sensor somewhere I need to check and if so what is the procedure? Thank you