Will I Fit Into Automated Wash

[LibertyTC]

After Lift and Rola basket install, I have not been through automated washes because of my 6`10 height.
41026[/ATTACH]"]

You must be registered for see images attach

The Car wash sign was 7 feet......
41028[/ATTACH]"]

You must be registered for see images attach

The attendant checked as I went under the sign had about 2 inches of clearance!
41030[/ATTACH]"]

You must be registered for see images attach

Yes...this is good news.....Come winter this is a needed service!:smokin:

 

[fullmetalone]

as long as you are in a touchless wash go for it. say away from those paint killers i mean brush washes.

 

[HoosierJeeper]

Agreed!

 

[LibertyTC]

Agreed.. in the photo it was a touchless, the only kind I would use that is automatic.
Is there many of the rotor brush type paint scrapers still around? Those are bad news.

 

[staggerlee41]

Wow1.gifSHOCKED.gif(dropmouth)

That's one sweet looking KJ you have! Great news that it just makes the cut, as much as it pains me to have to take mine through a car wash, it's essential during the winter.

 

[LibertyTC]

Coin Power Wash-Bugs be gone~!

You are lucky if you have a home power washer or coin operated wash bays close by, cause around here they are few and far between!
Just got back from a highway boogie and I think I need to consider doing the bug screen mod soon!
The whole front end was splattered and the rad/condenser was caked.
41352[/ATTACH]"]

You must be registered for see images attach

With about 6 cycles, and soap/sponge,blasting the rad, I got it clean again.
Even wiped the rims/tires with a sponge this time.
I think these coin power washers are good news for Jeeps.

 

[Ciphergiest]

The under carriage blasting is great too when you are all caked up with mud