JBA ucas - grease fittings and bump stops

[jeeptorino68]

What does evryone do about the zerk fitting on the top of the JBA ucas and the bump stops....just let it hit? Clearance the bump stop? Put in a low profile zerk?

 

[tommudd]

What does evryone do about the zerk fitting on the top of the JBA ucas and the bump stops....just let it hit? Clearance the bump stop? Put in a low profile zerk?

Notch the bumpstop, upside down "V" notch above the zerk
simple, two small cuts and done

 

[65Corvair]

I bought these from Rock Road Outfitters many years ago. They cost a bit more than cutting the bump stop.

You must be registered for see images attach

 

[tommudd]

I bought these from Rock Road Outfitters many years ago. They cost a bit more than cutting the bump stop.

You must be registered for see images attach

Lessen travel as well

 

[jeeptorino68]

Lessen travel as well

Not if you just have factory length bump stops

 

[tommudd]

Not if you just have factory length bump stops

True, but most of the lifts I have installed need the front bumpstops replaced anyways