Help please

[Henry brenton]

Can any one tell me what connector the signal wire from the crankshaft position sensor runs to in the pcm
Thanks

 

[mrlavalamp]

Probably one of the ones under the hood.

EDIT: Looks like connector C2 according to the wiring diagram.

 

[Henry brenton]

I was thinks along those lines

 

[Billwill]

Download the wiring diagrams to see exactly which pin it goes to although you can check the wire by its colour and the cam and crank sensor normally have a shield wire around it which also goes to a nearby pin. Section 8W is the Wiring Diagram.

There is a description in the Wiring Diagrams of the connector pin-out and how to read them.
www.colorado4wheel.com/manuals/Jeep/KJ