Gasket for Turn Signals and Fog Lights

[wheeee32]

I have an 06 65th KJ. I've been trying to look these up on rock auto and the other parts websites and I can't track them down. I want to put new ones on since I can see condensation on the inside of the lenses at certain times. Any part numbers or links?

 

[tjkj2002]

No gaskets,the lense is melted to the housing or glued,you replace the whole housing.The vent in the housings are most likely clogged and hence the condensation.

 

[teckman02]

or there could be a crack some place around the housing where it is melted i had this ame thing happen to me what i did was i took some clear RTV silicone and put it on around the fused area where the housing and lens is at.... since then i have never had any condensation again

 

[wheeee32]

Ah okay. Thanx much guys. I'll mess with it this weekend when the temp gets up to 50. It hasn't been above 30 all week here. The wind felt awesome on the flight line today.:Caffeine: