Search results

Hey there every one, just thought I would drop by and let you know that JBA (Jeepin by Al) is in the process of developing a steel front diff for the KJ that will be a bolt in unit. Just in case you don't get the email from him, here is the info: Do you want a steel front diff for your Jeep...

Hey there every one. I now have a custom gear ratio/tire size/speed calculator that I have modified for both the NSG 370 and 42RLE. With this, you can enter in a new gear ratio & a tire size and it will tell you how fast you should be going @ XXXX RPM in X gear... PM me you personal email if you...

Just wanted to pass along a HUGE thanks to Eric @ Automotive Parts Unlimited :D Got my order yesterday. It was very well packed, and shipped very very fast!!!! Thank you Eric!

As most of you can see, this section is pretty dead. So I ask you: What would make you post more? I know there are not to many KK owners over here, but I know you guys could post more..... I'm taking any ideas to make it more appealing. If you don't want to post your idea, PM me :D...

I have a set of NEW JBA UCA's for lifted KJ's... I'll add more info later $320 + shipping My buddy bought these on 4-29-2009. He had intended to lift his CRD, but with other bills, they naver made it on to his CRD. These have been sitting my living room since then. With him probably...

Here are some pictures for you guys :D

Well guys and gals, since I don't get over here much, I just thought I would let you know that testing on the JBA 4 inch lift is just about complete...... I'll keep you guys posted as to the out come of the v2.0 lift............. More to come later on!

Hey there guys and gals, I was just curios as to how many members we have over on JKJ that are not registered on LOST or have given up on LOST because of some of the a$$hats over their... Please vote ONLY if you have a KK. Digger is in talks right now for a super secret toy for our KK's :cool...

Before, the time when my KK was stock and still had new car smell!!:eek:, After some mods, After HID's

You asked for it, and now I'm giving you a write up.... But first, a little history........ As most of you know, the KJ came stock with hood struts. Starting in 2007 with the Dodge Nitro, the standard hood struts were removed probably due to cost cutting. However, the KA Nitro in 2007 came with...

Tools Needed APPLY THE EMERGENCY BRAKE First start by removing the rear converter panel from the rear of the center console Next direct your attention to the shifter/4x4 cover panel Once the rear of the panel is popped up, pull the panel towards the rear of the...

Tools need: A flathead screwdriver, putty knife, utility knife or any tool with a flat tip. 1) To begin, apply the emergency break and move the shifter into neutral or drive. (the key must be turned to the "on" position but engine not running) 2) Next turn the bottom chrome piece of...

Hello everyone! first off, Id like to thank digger for getting me into this...the install of the intake was a little annoying (unconventional/non practical perhaps?) but in the end it was all worth it. Im going to try and explain the install step by step and I really hope that digger will...

TOOLS FIRST APPLY SLIGHT PRESSURE TO BOTH OF THE CARBON FIBER STRIPS LIKE SO ONCE THE BEZEL POPS OUT A LITTLE, GRAB THE CENTER AND PULL AFTER THE TOP CLIPS ON THE BEZEL ARE POPPED OUT, PULL UP AND OUT TO UNSEAT THE BOTTOM POSTS NEXT IS TO REMOVE THE ELECTRICAL CONNECTIONS...

Ok this is going to be short and sweet for right now. I will expand it in a couple of days First, Tools needed First using the pick tool, push out the center of the 2 pom rivets that secure the rear of the fender flare to the bumper Next remove the 3 fasteners that...

OPERATION The change oil indicator gives an indication to the vehicle operator when a duty-cycle algorithm contained within the software of the Powertrain Control Module (PCM) determines that a recommended oil change interval has been attained. This indicator is controlled by the instrument...

Ok every one... I got bored on Sunday and thought I should do some exploring. It is one of my goals to create a in depth How To section as there is for the kj. If you have a how to please submit it so we can build the knowledge base First, Pop the two retaining clips for the lower kick panel...

OPERATION The left (lighting) multi-function switch uses resistor multiplexing to control the many functions and features it provides using a minimal number of hard wired circuits. The switch receives clean grounds from the Steering Control Module (SCM), then provides resistor multiplexed...

Ok every one, I am posting this for Scar0. These are the PDF files that he produced when he did the 2.5 on his KA Nitro Part 1 Part 2 Thank you very much for these install instructions Scar0. The KA and KK are identical when it comes to suspension.

CHECK OIL LEVEL 1. Verify that the vehicle is parked on a level surface. 2. Remove the dipstick tube cap. WARNING: There is a risk of accident from vehicle starting off by itself when engine running. There is a risk of injury from contusions and burns if you insert your hands into the...