Search results

I've had it aligned but the problem is the same.

My '02 Liberty has a bump steer problem and pulls to the right. It's noticebly harder to turn to the left than right. And both tires look as though their headed in different directions. I've had it aligned but the problem is the same. Could it be the recall replacement ball joints? P.S...

Just curious.

What's the contact information you were given?

I sold the Escape for the Liberty, but only so I could tow 4-down.

Not hardly! My '03 Fords have been fine, and every other new vehicle I've had in the past 10 years didn't show wear and simple damage like my Liberty does.

I guess I shouldn't have purchased a Jeep Liberty because the factory paint needs to be re-worked over and over again!

My '02 Limited needs a full body repaint. It has too many nicks, scratches, and dings by the previous owner whom I purchased it from earlier this year. I'd like to change it from the Limited Blue to White. I've never had a full car repainted and need recommendations and gotchas. I'm in Phoenix...

On my '02 I unclamped the intake air tube at the throttle body and sprayed with carb cleaner until shiny and clean. Of course it takes a few extra cranks of the engine the first time after to get it started again.

The driver's window regulator failed two months ago on my '02 and I had to replace it. The window still moved but wouldn't stop moving when at the fully closed position.

The use of most synthetic gear oils negates the need for friction modifiers.

You don't have to remove it, but it's a PITA and messy either way.

I installed the replacement mirror from ChryslerPartsDirect.com today and it works as good as the original. It was only $10 more than the supposed OEM mirror I bought from eBay that wasn't usable at speeds above 40.

I replaced the motor/regulator assembly on my '02 today in about an hour. Works like new! It would have been nice to have a third hand to hold the window in the full up position which must be done to get the old part out and the new one in.

Mine were replaced yesterday on my '02. I printed the letter from Jeep.com and scheduled the appointment Monday for Friday at 8:30. It took all of about 2 hours with the login/paperwork/logout process included.

I believe those are the anti-rattle springs found on the front calipers. I reused mine with the last brake job.

I changed my '02 with 57000 over last month and have zero problems.

I've purchased small parts from RockAuto.com but their customer service is lacking. Are you sure it's an OEM part?

Thanks. It looks like all that I can buy is the motor/regulator assembly; www.chryslerpartsdirect.com.

The driver's door power window motor in my 2002 has started making a ratcheting noise when the window reaches the top (closed position). It's both startling and annoying when I don't remember that it's going to happen. My shop service manuals don't have a diagnosis table but mention that if...