Search results

I noticed some weeks ago, the ac quit blowing cold. Haven't used the Jeep much since I'm working on the sound system, but did need it to go get a Christmas tree. When I got home, I could hear bubbling from the engine, popped the hood and saw the reservoir tank bubbling. I checked the fan, and it...

Im running a 200amp relay that feeds a key on fused distribution block for some accessories. I want to add some LED lights up front and rear. Thought it would be easier to just purchase the premade wire harnesses. The harnesses both come with its own relay. I should be able to just remove these...

Delete

Where did you guys mount your toggle switch for whatever accessories you added? I have a 3 panel switch but finding it hard to find a flat surface on the dash. Pics would be great

So I just replaced everything up front. When I put the clevis back in, I left it about 1/4" gap for the clevis lift. On the pass side as it sits the spring is up against the a arm ( using the JBA arms ). I have the top plate and I have an 04 but I swapped to the larger clevis'. When I measure I...

Anyone see any reason why this wouldnt work? I want to add a USB hub in the center console for the backseat passengers, fab it in somewhere near the window switches. I would like to tap in off the power that runs the switches. Also want to add a USB hub on back cargo area and want to tap off...

So I am rebuilding the front end. I have the axle half and intermediate shaft out and separated. How do you get the C clip out of the female portion of the axle half? My snap ring pliers wont do it because you cant expand the C clip because of outer wall of the axle half.

I thought the dashboard's were the same ( based off model years ) But I noticed that the 02 has 2 bolts that hold the metal frame to the side foot panels as where the 04 there is only one bolt. Before I pull out the 04, will it not fit correctly, if anyone knows? Thank you

Anyone ever have this happen? Mine just broke off inside the pin area. I was able to drill a hole in the center of it, but then the extractor broke off in the newly drilled hole. Has anyone drilled straight thru to put on a new bolt and nut? Anyone have to drill it out and use a helicoil? How...

I am constantly shaving something from my underside. I waited almost a year before doing any kind of clearance work. Every couple of months, it begins to rub. I cut away material, its good for a few more months then it starts to rub again. Is this normal ( Im thinking not, at least not this soon...

Tires are wearing odd on the front. All new suspension with exception of lower a arm. My camber is sligjtly off on pass side bit that doesnt explain the wear pattern ot even why on drivers side. Each lug kind of ramps up to the next lug in front of it. Hoping you can tell by photo.

Aside from an unknown accident to me, what would cause such a difference in UCA to spring gapping? Driver's side nice clearance, pass side clangs on a pebble. Ome springs 1/4 top plate Kk clevis

Anyone know if the 07, 06, 05 fender flare fits the earlier years? Thanks

Are they made straight or have a downward angle?

Any of you wonderful people have any front / rear upper / lower isolators sitting around that you would be so kind to measure the diameters of the outside and inside? It would be much appreciated.

Putting together a 3" level lift for the Liberty. Wanna be sure I have all that is needed to begin and finish in a day. Front end: Springs Shocks 1/4" top plates Bump stops Back end: Springs Shocks Extra isolators for top ( just stock oem ones ) Hockey pucks ( 4 pucks and hardware...

Ive read that steel wheels fit, but alloys dont because of hitting the caliper, yet Ive read that some alloys fit with shallow backspacing. Im looking at a set of Pro Comp Xtreme Alloys Series 7069 that have an offset of -46 or backspace of 3.675. Anyone know for sure if these would fit with...

Anyone have info on both front and rear compressed and extended lengths?