Search results

  1. Myke

    I built 2 sets of adjustable and rebuildable lower rear control arms this past weekend.

    Some Features Fully adjustable allowing better alignment and pinion angle adjustment Fully rebuildable. Can buy only the part you need instead of a whole new joint/bushing/control arm With the Enduro joint (right side) they offer the most flex at 40 degrees of mis-alignment per Enduro Joint...
  2. Myke

    2011 KK - A/C Button doesn't work

    On my 2011 KK 211k miles the A/C button doesn't light up when pressed. My mom drives this Jeep and took it to a local mechanic she uses and they said it's a bad PCM. Just wondering if this is correct, if not where should I start to diagnose this issue? Also if it is a PCM and I get a...
  3. Myke

    Come offroading with us 1/20/19 & 2/9/19

    In case you missed out we regularly plan weekend and single day trips to [Rausch Creek Offroad Park](Rausch Creek Off-Road Park) and [Anthracite Out Door Adventure Area](AOAA FULL THROTTLE EXPERIENCE | AOAA Trails) over in /r/NJ4x4. Both of these parks are located in Central Pennsylvania. We do...
  4. Myke

    Airflow Snorkel + New JBA Coilover CRD Springs

    SOLD Snorkel is in good condition. No cracks or deep scratches. SOLD I also have CRD JBA Coilover springs. Brand new. JBA sells them for $198. I'll let them go for $125 or best offer. Buyer pays all shipping costs.
  5. Myke

    Cheap Hood Vents!

    I've been searching for some good looking and affordable hood vents. No way was I paying $100+ for them. I've found 2 sets that I really like and wanted to share with everyone here. The first set I ordered for my XJ. The second set I'm considering for the KJ. BleepinJeep Hood Louvers...
  6. Myke

    Rear HD Control Arm Mounts + Adjustable Long Arms

    I keep killing bushings in my rear control arms and tri-link. These things were just never meant for the amount of repetitive flex I put them through. I also want to have the rear ready to go for when I do the SFA swap as I will be replacing the c8.25 with a 1 ton axle (D60, Sterling 10.50...
  7. Myke

    Jeep Luau on Point Pleasant (NJ) Beach Friday & Saturday 5/4-5/5

    Jeep Luau on Seaside (NJ) Beach Friday & Saturday 5/4-5/5 Posting this here instead of the Mid-Atlantic section because no one checks there. Just wanted to see if anyone else will be going. I will be down there Friday night and Satuday with Dude1116, and a few other KJs not on this board...
  8. Myke

    How to determine bad heads, bad rings, or both?

    So I have 148k miles. I haven't noticed any powerloss since I purchased with with 130 miles in Nov 2016. I didn't pay much for the Jeep so went in with an engine replacement/rebuild in mind. Normal driving there is some blue smoke out the exhaust but not very noticeable. When going up an...
  9. Myke

    I installed a Spartan locker today.

    I installed a Spartan lunchbox style locker today in my rear differential. The install wasn't to bad. No need to remove the ring and pinion or the carrier. You remove the spider gears and replace them with the locker. It took me about 2.5 hours. Mainly because the instructions didn't mention...
  10. Myke

    Broken JBA Coilover & JBA Lift Pricing Rip-Off

    Add this to the list of parts I've broken. I placed an order for the replacement strut cylinder. If they're in stock and ship out tomorrow I should have it on Tuesday. Haven't had it for a year. No idea when it happened. I went wheeling during the snow storm Thursday but it wasn't broken...
  11. Myke

    Oops

    Only took 6 months. Time to start pricing out a sfa if I can't find a cheap junkyard one that's ready to swap in. Pulled the front shaft and pinion. Was able to drive 25 miles home from the trails.
  12. Myke

    EASY PHOTOBUTTCKET FIX!!! Help me save all the pictures!

    No Joke. This works for Firefox and Chrome browsers. Install the addon listed below for appropriate browser you're using. You may need to clear your cookies and site cache for it to work but I didn't need to. This addon will fool photoballs into thinking you're accessing the image from...
  13. Myke

    Couple questions about doing front CV Axles

    I'm replacing both front CV axles and intermediate shaft. The axles I'm getting reman'd from Napa. The intermediate shaft is available from Crown for $80 or Omix-ADA for $125ish. Is Crown fine or should I spend the extra for an Omix-ADA? Should I pick up seals and bearings? How...
  14. Myke

    Where to order a snorkel from? Go ARB or Airflow?

    Do you know of anyone who has a snorkel in stock in the USA? Airflow is ~$100-125 cheaper than the ARB Safari Snorkel. I've seen posts about the ARB being better build quality but no one goes into detail why. JBA said it would be 7-10 business days for the ARB. OK4WD won't give me an...
  15. Myke

    Raptor lining my interior because wet carpet sucks.

    Picked up a 1 "gallon bag" of Insulating Paint Additive Makes Paint Insulate Mixed it into 1 gallon of Rustoleom. Just put down the first coat. Gonna do the 2nd in the morning. Then spray the Raptor liner after work.
  16. Myke

    How To: $10 Rear brake line drop mount for lifted KJs

    Parts cost was less than $10 at HD. Tools: 10mm socket metal snips or sawzall or whatever (optional)Creeper Materials: 1 M8x1.0 20mm bolt 1 M8x1.0 Nut 2 M8 Washers 1 1-3/8in x 1/16in Punched Flat Plate (optional) Paint Step 1: Cut Punched Flat Plate to length similar...
  17. Myke

    Replace pinion bearing or swap axles?

    I believe my pinion bearing is bad as I have a loud hum under load. Similar sound to my mud tires just 5x louder. I lifted the vehicle/tires off the ground and accelerated up to 20mph (don't do this) and the noise is still present which is why I believe it's the pinion bearing. As someone...
  18. Myke

    How-To: get 30+ mpg from a KK

    Just kidding. Found this picture posted over at reddit.com/r/jeep
  19. Myke

    NJ Jeep Invasion - Wildwood, NJ June 16th-18th

    I would have posted this in the Mid-Atlantic section but it's a ghost town and maybe someone from outside the area would be interested. June 16th-18th (Fri, Sat, Sun) in Wildwood, NJ NJJeepInvasion.com I will be heading down early Saturday morning, staying over, and heading back sometime...
  20. Myke

    My 03 Squeaks

    Short video where it's present https://drive.google.com/file/d/0Bz1SE9Wej4v1SjlDT2V4dFpTWWs/view?usp=drivesdk I've tightened the top strut bolts, jba uca tightened with weight on them, New moog swaybar bushings and moog endlinks. All torqued to spec. The jba uca balljoints are definitely...

Latest posts

Members online

Top