Search results

  1. T

    Back Glass Support Ball?

    Thanks, fellows! That's kind of what I figured, but thought maybe there was an alternative. Have fun!
  2. T

    Back Glass Support Ball?

    This 03 I've acquired has a few rusty spots. I've got it in the usual places, of course. 3rd brake light, washer nozzle, rockers near the rear wheels... But this one is quite interesting. I thought it was strange that the ram on one side of the lift glass was missing, but didn't look...
  3. T

    Looking for answers

    The hill could just be coincidence. I would try to replicate the conditions a few more times to be certain if the terrain makes a difference. If it is consistent and repeatable, I'd start looking for a loose or intermittent connection. Could be something is coming loose when the Jeep is in a...
  4. T

    Rough running

    Could be a sensor on it's way out. Crank sensor, TPS?
  5. T

    Tranny woes... Need ideas!

    Thanks everyone for your ideas and support!
  6. T

    Tranny woes... Need ideas!

    FIXED! Ran a new wire from the TCM connector down to the connector where the splice was. Then swapped the connectors so they were in the proper order. Runs and drives like a champ now! Hooray! Now I just need to figure out why the drivetrain is so noisy. Need to change all the fluids and...
  7. T

    Tranny woes... Need ideas!

    ok, I couldn't resist. Checked the plug against the pinout. The plug is correct everywhere. Red/black where it should be headed to the INPUT. Green/white where it should be, headed to the OUTPUT. The wiring at the sensors HAS to be wrong! ...or someone spliced in another chunk of wire at...
  8. T

    Tranny woes... Need ideas!

    Ok, the lost sensor arrived today. Still no good. The codes changed, though. The first run gave me a P0733! 3rd gear ratio incorrect. It never went into third gear! I swapped back to the original TCM at this point, considering what we discussed earlier. The second run gave me a P0731. I...
  9. T

    Tranny woes... Need ideas!

    Thanks guys. This one was built in February or March, I can't recall at the moment. I contacted Chrysler and got a build sheet, and the 42rle is what came in it from the factory. The 45 uses the same two sensors, and the 42 uses two different ones. I agree that the wiring diagram I have may...
  10. T

    Tranny woes... Need ideas!

    Another thing occurred to me. Can someone with this tranny combo take a look at the speed sensors and let me know what the wire colors are? The wires on mine do not match the wiring diagram in the FSM. I have a Black/Blue stripe on both, which is correct. The input has L. Green/ White on the...
  11. T

    Tranny woes... Need ideas!

    Alright, fellows. Long time lurker, first time poster. I've laid my hands on an 03 Liberty Limited. Pretty nice ride, but it has a major flaw, which let me snap it up pretty cheap. It's an early 03, but it had the 42rle. Confirmed with the build sheet. Here is the story: The fellow I...
Top