Search results

7 way harness Anyone know what is wrapped in the insulation and sealed up when you buy harness from Mopar? I assumed relays and connectors but I never unwrapped it to find out.

All of the trailer lights work as they should with fuse installed. Correct power for each contact in trailer plug. It just drains battery. Where are you working? We will have to meet.:gr_grin:

I installed Mopar 7 way harness and supplement harness as I have no overhead console,ever since if I leave fuse in that goes to positive terminal on battery my battery goes dead in 2 days. The battery is new and is 750 Cca and when I check the only thing that does not work is trailer running...

Hitch wiring I have the complete harness with 4 way plug all set up for liberty if your interested. It even has a bracket and mount that can be bolted on your jeep. Let me know if you are interested might save you a few bucks.

No the 03's are not the same. 02-04 and 05-07 for foglights. The 02-04 are in the bumper.

So i ordered and received new high press power steering hose. While looking it over i see it has a pressure switch and my current one does not. Is it ok to use and just leave the switch in the line or try to find a plug for the switch? It is o-ring sealed and has different threads so any...

Thanks I figured I better get a couple.

Anyone know the part number for the 2 bolts and nuts holding front diff support brackets that cannot be removed without removing LCA? I would like to have these on hand just in case. Thanks

Sounds good I sent you a PM

Any details on the gears? New,used,miles,brand and price and when you could install them!!!!! Just kidding about the install

DETAILS Ring and Pinion 4.10 Gear Kit, Ratio 4.10 2002-2005 Jeep Liberty KJ aluminum housing Tomm is jba or jeep dealer still the only place to get these? If I search it seems there are a lot of folks claiming they have them but I want to be sure when ordering. Anything else besides the...

I am close to Marietta OH,Parkersburg W.VA area,not that far from Wheeling W.VA. What would be a good price to do the gears in both and install DTT in rear? Thanks

Anyone know of any shops or individuals that will do gear swaps in the Mid-east Ohio river area. Everyone I contact wants no part of a gear swap on a jeep liberty. Help

Well I changed both front CV shafts and front hubs today and all is fine until I put in 4WD and I get a deep click and clatter from front end. I used NAPA reman shafts and replaced intermediate shaft also. The wheel bearings are Timkens. I can find nothing wrong with anything including front...

Light taps with a BFH.:favorites68:

2004

I am looking for the Jeep part number for the bolts for the lower yoke/clevis on the front suspension. The ones you have to pull into place with a ratchet strap when installing a lift.

04--Sport --Auto--Anybody happen to have the Napa part # for front and rear greaseable u-joints? The Napa here is saying you can't replace front one on rear driveshaft. Also what do you use for clamps on the boots after you remove driveshaft? I assume you have to cut clamps off to remove...

Are you still looking as I may have one?

Thanks guys got her changed and works great:party52: