Search results

  1. S

    First time SKIM problem?

    ALSO, wouldn't an intermittent failing CPS set a DTC ??
  2. S

    First time SKIM problem?

    A guy on LostJeeps is suggesting that the clunk I heard is likely the intake throttle opening up under spring pressure after closing on key off for engine shutdown. I will verify this later today by starting the engine, then shutting down and listening for the sound that I heard when the engine...
  3. S

    What did you do to your jeep today?

    Sometimes its the little things that make a difference... Today I was able to remove the drivers side interior door panel without breaking anything. :cool: Then I removed, took apart and cleaned, then reinstalled the mirror adjustment control so that all the buttons worked again.
  4. S

    First time SKIM problem?

    ^^^ OK, I got it now...You guys are saying that, at least on a KK, with a bad SKIM signal it will simply restart immediately and then keep dying after 3 seconds unitl the SKIM is resolved. Anybody know if the KJ CRD SKIM behavior is different then that??
  5. S

    What did you do to your jeep today?

    Pix ... or didn't happen!! ;)
  6. S

    First time SKIM problem?

    Thanks for clarifying that the key fob battery cannot be the problem. Still wondering what the soft "clunk" that I heard might have been and if it is likely related to the crank/no start condition as she started up right after I heard the noise. Also still wondering if the SKIM activating...
  7. S

    First time SKIM problem?

    Earlier today, I started Giddyup (fully warmed up from running many errands) and was about to put her in gear and drive off and she suddenly died...just cutoff ... she would still crank hard but NOT restart. As she has never done anything like it before, I was startled and while I did see the...
  8. S

    Differential vs. Transmission Speed Sensors

    Metal dust particulates are normal, but metal shavings less so ... Maybe time for a rear diff lube change and inspection?
  9. S

    What did you do to your jeep today?

    I use an air compressor with a narrow fan tip along with the vacuum cleaner, running them tip to tip, for deeper carpet cleaning that doesnt require wetting things down.
  10. S

    Brakes engage intermittently ESC light flashes

    Did you check the tire pressure in the spare that you put on?? If it is much different then the other tires, then the ABS on that wheel will be sensing a different speed and might be activating the module.
  11. S

    Hidden kill switch location??

    Well you had me fooled Sure would have been nice though
  12. S

    Hidden kill switch location??

    So it looks like if I can isolate the wire that goes to #87A (normally closed) on the ASD relay and then extend and switch it from inside the car that would do the trick. That, or simply pull the ASD relay while Im parked in the city...like KJowner already suggested. ;)
  13. S

    Hidden kill switch location??

    Hmmm ... having trouble finding the park safety interlock switch in the FSM ... of course there are a LOT of references to parking BRAKE switches, and neutral safety switches for manual transmissions, but not for the parking interlock...at least that I could find. Im sure I could find it by...
  14. S

    Hidden kill switch location??

    I like that idea alot...the Park/start switch must be located in the AT shift wiring bundle right in the center console...could tap it and hide a switch from there pretty easily !!!
  15. S

    Constant Chirping While Idling

    If it is the serpentine belt, then when it’s off for replacement, you’re gonna wanna check each and every pulley (except the crankshaft) that it runs around for excessive looseness or roughness or tightness while spinning them by hand since they eventually go bad and will lead to belt wear...
  16. S

    Constant Chirping While Idling

    Dont just pour water on it...use a spray bottle set to "stream" for more accuracy around the pulleys. The soapy water temporarily lubes the belt and squeak will go away if the belt is bad. If it doesnt go away, then something else is causing the squeak.
  17. S

    Constant Chirping While Idling

    Serpentine belt or one of the pulleys it runs around is going bad. You can spray lightly soapy water on it while running to find out for sure.
  18. S

    Hidden kill switch location??

    hahaha And just where is this mysterious and all powerful ASD relay located on a CRD??
  19. S

    Hidden kill switch location??

    Weekend bump...anyone ??
  20. S

    Hidden kill switch location??

    Soon Im gonna to be using my KJ CRD UAV (Urban Assault Vehicle) to travel to the Big City more often, so I want to install a hidden ignition kill switch to completely disable Giddyup's "git up n'go" . Inflation means that I cant afford the Ravelco like I have on the big truck, so ideas on...
View older results

Random media

20130323 173048
worm view
jeep black dragon canyon small
Angel Terrace (Yellowstone NP)
Need cheater bar here. Their a bitch going in.
image
LED fogs and 23" LED light bar
In blue
IMG00065 20100111 1045

Latest posts

Members online

Total: 404 (members: 3, guests: 401)
Top