Search results

  1. KingKJ

    Top end rebuild parts

    ok, my timing cover gasket is leaking oil so I will end up having it off anyway I'll have to see if I end up needing to replace the gears/chain from the timing cover once I get it off
  2. KingKJ

    Rear bump stops

    ok, hocky pucks it is lol, should be interesting, maybe i'll color match the the new upper bump stops for some reason amazon only sells bright orange ones lol, I lost them after hitting a puddle too hard and haven't had any bump stops for the past 6 months.
  3. KingKJ

    Rear bump stops

    Does anyone have part numbers for any rear 2 inch extended bump stops?
  4. KingKJ

    Rear sway bar

    Should I bother to keep my sway bar around in the rear once I lift my jeep? I've heard that you shouldn't run disconnects on the front(if this is wrong let me know), I've also heard that the rear swaybar isn't doing much, is it advisable to keep the rear swaybar or will it be fine without one?
  5. KingKJ

    How to adjust Iron Rock Offroad control arms

    I am going to be installing IRO control arms with my new lift kit and am wondering how you adjust the control arms, and how do I tell where to correctly adjust them too? I haven't order the parts yet so I'm unsure if the instructions in the box will include this information or not.
  6. KingKJ

    Top end rebuild parts

    I need some help locating some quality parts to do my top end rebuild with, preferably in a kit and maybe some parts that aren't included in the kit that should be replaced on a motor that is 225k miles old. Luckily after scoping the pistons it appears the lower part of the engine won't need to...
  7. KingKJ

    Is this the end of Liberty?

    common past 100k... makes me glad mine lasted until 225k as far as I know(no previous paperwork for head gasket repair from previous owner)
  8. KingKJ

    Replacing Head Gaskets

    well good thing I'm doing that anyway, Just discovered the oil leak coming from there lol, still have head gasket issues, just now also have to do the gasket for front seal/timing cover/ something leaking oil in front of engine
  9. KingKJ

    Replacing Head Gaskets

    Honestly didn't know those are prescribed to come off lol, I was talking about all of the stuff that's located on top of the engine that us visibly in the way.
  10. KingKJ

    Replacing Head Gaskets

    We just replaced the spark plugs and the engine is also throwing misfires still, haven't checked compression, the valve guides and stem seals will be looked at during the teardown process. I'm hoping the pistons aren't too bad, but I'm also a bit worried just because of age and the fact I've...
  11. KingKJ

    Replacing Head Gaskets

    Alright, I'll have to see once I actually get it off how bad the gasket is, but I don't think it's all the way dead just because I'm not mixing coolant yet so I'm assuming the gasket hasn't completely failed, but it is starting to fail. Also I plan on doing both sides just because they are both...
  12. KingKJ

    Replacing Head Gaskets

    So pretty much I discovered this last week that my Liberty is burning oil at a quick rate and it is most likely a head gasket issue. I had to drill holes above the cats after a vacuum line failed and I've been getting small amounts of oil leaking from the holes I drilled as well as when starting...
  13. KingKJ

    What did you do to your jeep today?

    Lucky, I'm a little disappointed I've yet to have a chance to really just slide around in my jeep the only real snow I've dealt with has been going down a mountain pass, not a place to try to drift lol.
  14. KingKJ

    Breather lines

    I'm planning on 3 inch lift and don't plan on deep water, but better safe than sorry
  15. KingKJ

    What did you do to your jeep today?

    It's running fine after we replaced that, we did have to replace spark plugs and drill holes in cats to get it to run fine but now it's running fine
  16. KingKJ

    Breather lines

    Does anyone know how many breather lines the first gen liberty's have and where they are located(differentials, transmission, etc.) I want to raise them higher when I do my lift kit just so I don't have to worry about it later. Also what would the process be to extend them?
  17. KingKJ

    What did you do to your jeep today?

    honestly just a guess but judging by the fact it clogged my cats and that my new exhaust got coated in like an inch of soot, I'd guess it was running rich, it could've been low, but it was just my guess based on how much junk got shoved out the exhaust.
  18. KingKJ

    What did you do to your jeep today?

    there's a T on the passenger side where the vacuum line goes to the airbox and it splits and the line goes somewhere to the back of the block, the old plastic was old and just snapped while I was driving
  19. KingKJ

    What did you do to your jeep today?

    Nvm just had a vaccum leak and the engine ran rich so it ruined my spark plugs and completely clogged up the cats to the point in order to get it to drive I had to drill holes before the cats, so now it's just obnoxiously loud :(
  20. KingKJ

    What did you do to your jeep today?

    Installed my MBRP exhaust today! (clip of how it sounds)

Random media

got some blue valve caps
165553034
The KJ 2-door kit is real and was mfg'd. by Terry DeLong in Kendallville, Indiana. The Rhino grill was created in photoshop.
4244.jpg
image my wife got my a allsome birthday gift
jeep1
2860.jpg
my new 2006 Libby Renegade
Photo102

Latest posts

Members online

Total: 399 (members: 2, guests: 397)
Top