Search results

  1. KingKJ

    how to drain fuel

    I'll have to poke around for a disconnect for the fuel line anywhere, where are the disconnects on the KK? Id guess it'd be slightly similar to KJ or at least give me a good place to start looking
  2. KingKJ

    how to drain fuel

    I already have it's replacement lol, also I'm nowhere near ready to do the type of repairs that need to be done and in the end it'd be way too much money to justify putting into a liberty especially if I took it to a shop, It need suspension rebuild and engine so it's pretty messed up
  3. KingKJ

    Rear Swing Gate

    is there any emergency switch or cord that can be used in the meantime, I'm gonna be gutting this down to nothing so I need to figure something out for the meantime either that or any way you know of to be able to rig it to open and shut manually w/o power at all
  4. KingKJ

    how to drain fuel

    What is the best way to get the fuel out of my liberty? My liberty decided to die on a full tank of gas so I need to try to get the fuel out of the tank, so far my best idea has been to just cut a fuel line and let it drain out by turning the key to on and sitting there letting the fuel pump do...
  5. KingKJ

    Rear Swing Gate

    Is there any way you can modify the rear swing gate so that the glass opens and closes normally even if there is no power to it. I'm tearing mine apart and need to take the battery out and would like to be able to open and close the swing gate without electricity, in the future I'll probably run...
  6. KingKJ

    redneck me is calling(Trailer conversion?)

    so I just had the idea to turn my blown up jeep liberty into a trailer lol, I have no idea if i'm going to do it, my main concern is weight, so would anyone have any idea about how much the engine, trans, gas tank, front suspension, etc would weigh? pictured below is kinda whats going through my...
  7. KingKJ

    wheel backspacing

    here is the comparison between the tires, My worry is that if the backspacing pushes it in, the tires from the kj will be too wide to fit or rub alot when turning
  8. KingKJ

    wheel backspacing

    This is the new jeep, the rims it has on suck and the tires aren't verry aggressive trim, the difference would be going from a 29 inch to 31 inch, so not without a lift, but I'm mostly worried about the backspacing and if the wheels will be pushed in or out compared to the stock 5.25 inch...
  9. KingKJ

    wheel backspacing

    What is the stock backspacing on the stock wheels for the liberty? Also if anyone has tried to fit stock wheels from a liberty onto a XJ I'd like that input as well, I'm trying to figure out if I'll be able to salvage my newish tires from the liberty and put them onto my next rig(most likely XJ)...
  10. KingKJ

    Knocking Noise and Metal in Oil

    Winter parking restrictions just ended so I've got until November before parking becomes a problem again
  11. KingKJ

    Knocking Noise and Metal in Oil

    Yeah I'll have to decide if im gonna do that because my other option is to just buy another jeep with the same money, the other main issue is I'm so early in my schooling that the ability for me to do a full engine rebuild is under question right now. Even if we do end up scrapping it I know I'm...
  12. KingKJ

    Knocking Noise and Metal in Oil

    That sounds like it could be the issue, only big thing is how would metal get into the oil that way? It wasn't just sparkly a bit it was sparkly alot with some decent chunks in the filter
  13. KingKJ

    Knocking Noise and Metal in Oil

    Yeah, my issue is I'm doing the work at my school and they want me to have parts ready before I start which is an issue, the other thing is we did some listening(screwdriver method) and you cannot hear the noise from under the valve cover or in the heads and it is coming from somewhere below the...
  14. KingKJ

    Knocking Noise and Metal in Oil

    The knock was also accompanied by a constant misfire on cylinder 6, it's been doing it for a bit just from the head gasket, but now it is constant(flashing engine light)
  15. KingKJ

    Knocking Noise and Metal in Oil

    Right now it sounds like the end of my liberty and it is most likely gonna end up being parted out, but I'm open to any thoughts/ideas but with how much work this suddenly turned into, it seems like a stretch.
  16. KingKJ

    Knocking Noise and Metal in Oil

    Well right after I started ordering parts and getting ready to fix my jeep it started having a random knock. There isn't any rhythm to the knock but it is there (https://photos.app.goo.gl/dUmFBhvaNWBpRs1dA) video clip if it works, it's the loud knock that happens occasionally. Once that happened...
  17. KingKJ

    Fender flares

    If you look on youtube you can find people who install the fender flares from a wrangler onto their liberty, there is also the option of the renegade trim fender flares if you can find them.
  18. KingKJ

    Rear sway bar

    I mean I'd assume so, probably would depend, that's why I'm making sure it doesn't make the car completely unstable
  19. KingKJ

    Is this the end of Liberty?

    This is what the inside of some of my pistons look like for reference about the head gasket, I have a leak, and am getting the white smoke out of the tailpipe which is the coolant being burned/evaporated and pushed out the exhaust. I don't have the oil and coolant mixing which is just a matter...
  20. KingKJ

    Rear sway bar

    have you had any situations where it got a little hairy because you don't have the rear swaybar? That's really my only worry is that I take it out and then something dumb happens and I lose control.

Random media

Fourth of July!
2014 01 28 15.24.121
Jerrycan mount 5
jeep liberty 010
DSC02781
Jeep Dash Night View
IMG 20140124 154928 938
fresh wash
Dean doing what he does best.

Latest posts

Members online

Total: 408 (members: 6, guests: 402)
Top