Search results

  1. Dmut

    New battery? What to get?

    Tom, does 78 group size fit into KJ's 34 size? any modifications of battery platform required?
  2. Dmut

    Winch question...

    not recommened. since original front crossmember was intentionally made to be easily bent, by safety reasons. it only has sence, if you will use original hook-mounting points. not a bumper itself
  3. Dmut

    Tow Hook Mounting Hardware

    for the front one: 52059352AA\52059352AB STUD PLATE, one per hook\eye 06504818AA NUT, two per hook\eye 06503699 BOLT, one 06504818AA-like NUT (M10x1.5) with U-support, no number for it, you'll figure it out when see it. for rear: 06502557 BOLT, Hex Flange Head, M12x1.75x40, three per hook\eye...
  4. Dmut

    another one How to replace fuel filter

    Thanks, Moab. I've learn a lot from these forums. now trying to payback.
  5. Dmut

    ....Spark Plugs....

    I have the parts.pdf for `08 KK, and 3.7l there has 6 sparks and 6 coils edit: that's weird, in `09 and `10 KK they have 3 coils and cable set. so, you are right. but I still wonder why they've changed it in the middle of production line? they can save like $20 on each car, but is it really...
  6. Dmut

    Battery

    Interstate are best for their money. Chrysler uses Interstate as OEM supplier and sells Interstate batteries by MOPAR brand since Jan 2006. It was Exide, as OEM supplier, before that, but Chrysler dumped them.
  7. Dmut

    Replace The Licence Plate Bulb

    I recommend to change a bulb to LED, since Chrysler plastic material tends to melt. see pictures. http://picasaweb.google.com/lh/photo/D5LBoVZWFi95N07l3JMfh6op1BU1IlIJC4qJ1jXjUGU?feat=directlink http://picasaweb.google.com/lh/photo/P4-IMaafNr9cwhiLxC1XVaop1BU1IlIJC4qJ1jXjUGU?feat=directlink...
  8. Dmut

    Sixth tire wreaks havoc on '04 Liberty

    it's looks like engine oil pan was cracked or oil drain plug was ripped off by wheel rim.
  9. Dmut

    KJ's rock rails, DIY-style

    But you have a point - if rock will stuck not on main rail but nearby of green point - then it will press against support (crossbars) and car will stuck. rare situation, but possible. Well... I guess, full-length skid-plate from subframe to big rail will do the trick, but it will be so heavy...
  10. Dmut

    KJ's rock rails, DIY-style

    if you start pulling it hard straight horizontally, or even lower horizon, then yes. pinch wield will be ripped out. but I hardly imagine this situation in RL. you most like will have some angle up, and in this case, rail with small bolts will press against the wielding-to-subframe angle, and...
  11. Dmut

    KJ's rock rails, DIY-style

    Thanks for your input, tommudd. nope. see picture. when you had hit a rock or just using hi-jack - the red point goes up. black point stays steady (because of big studs are sitting tight), so green point presses up to subframe, which is hard enough to take a weight of vehicle. small nuts on...
  12. Dmut

    KJ's rock rails, DIY-style

    yes, these rock rails are hard-bolted only to pinch wield, Studs on the end of crossbars just inserted to factory holes, no nuts there. Those bolts-studs are big, like M12, so they don't move inside chassis holes. overall construction is quite sturdy. Good point ))) Those shopping carts could...
  13. Dmut

    having diff fluids changed got???s

    RenegadeJay, tell me your VIN. I'll tell if you have trac-lok or not. I have access to Chrysler PAIS.
  14. Dmut

    KJ's rock rails, DIY-style

    Thanks guys! Custom-made steel roof-basket for KJ is on the way )))
  15. Dmut

    KJ's rock rails, DIY-style

    my custom-made rock-rails for KJ. since I made them for riding in wild and don't "wearing" them in the city, they was engineered with idea to make install-deinstall time short, it takes only 5 minutes to put them on. Also, crossbars are a bit long, because I use hi-jack to lift KJ by these rock...
  16. Dmut

    8 engine codes, where do I start

    first do key jingles trick and confirm all codes. those ODB-scan applications sometimes come out with weird codes....
  17. Dmut

    another one How to replace fuel filter

    First of all - forgive me my English, I'm from country far far away... Second - if you are not completely sure your old filter is faulty or if you want to replace it "just in case" (in my case) - then don't! you will make some irreversible changes to your rig, which could lower it's market...
    • Dmut
    • Thread
    • Replies: 15
    • Forum: How To
  18. Dmut

    HOW TO: Keep your Fog Lights ON with High Beams

    it shouldn't be sealed. looks like you got it after some unprofessional repair. you disconnect wire from bulb socket. then turn bulb socket a bit and it will be out of reflector unit.
  19. Dmut

    HOW TO: Keep your Fog Lights ON with High Beams

    thanks for article, myjeepwalks. just installed to my `03 limited. it works like a charm. ps: here is a picture to help locating "white with tan stripe" wire. it's second from the top of connector. http://yfrog.com/2i0240kj
  20. Dmut

    HOW TO: 42RLE Transgo Shift Kit Install

    no, 2WD KJ's use the same 42RLE

Random media

If you've got a sears auto, buy the die hard, if your in canada you buy this if your sick and tired of plugging in.
055
100 3581
This kid was 6'5 and 135lbs- Im in the blue and red
Getting Duratracs soon. These Coopers suck. They have the worst tread life I've seen for any at's. Also removed the Spider Trax spacers. Was adding to
2261.jpg
Prior to the accident, the old black grille.
Drivers Side Roof Rack Lights
cwash2

Latest posts

Members online

Total: 344 (members: 3, guests: 341)
Top