Search results

  1. J

    03 liberty

    there are two vacuum connections that may prevent the door from opening. Actually you should here the change when going from vent to defrost ect. The inside line is over buy the right side of the glove box I think it actually connects to a vacuum canister "mine is a small square box". the...
  2. J

    air bag light on

    Acquire a scanner that can pull Factory Chrysler codes i.e (air bag / abs). I am dealing with a air bag light issue which was intermittent when we purchased the 02 a year ago, however after the rad and heater core were replaced the issue became constant. Replaced front impact sensors...
  3. J

    wiring help needed

    Sorry no close up pic's of connectors, only pic's of the complete dash being out. In hind site the only issue with the harness was the lower routing around the air box over to the passenger side. Mind you I did miss the vacuum hose for the air box. It took some time to find it tucked up on the...
  4. J

    wiring help needed

    Have you determined what does not work?
  5. J

    wiring help needed

    I recently replaced my heater core to. On an 02 /03 the environmental controls have two connector/plugs, along with two 12v power plugs , one for the ash tray and the other for 12v power for usb ect. Did you check the hazard lights button? Mine is between the two ac vents? On my jeep it is...
  6. J

    Help! lug nut sheared off

    Most tire shops hate it when customer says 'Do Not use a Impact wrench". the first time I herd that demand I was second in line at Budget tire and I thought the guy / customer was being unreasonable. There shortly after my 03 was in the bay and when they brought it back it had a snapped off...
  7. J

    Trying to figure out best oil...

    I did the same thing on both my 03 and 02 with respect to changing the standard oil out right away after purchase. My 03 had 30k on in when I purchased from dealer in 05 and never considered running standard oil again. I had to change out the valve cover gaskets around 130 K Miles "O those serve...
  8. J

    What did you do to your jeep today?

    The noise will be the first thing and you might notice it get quieter when you start to slow down. If it is bad you should feel / see some movement, if you jack up the suspect wheel and try to move the wheel in and out / top & bottom of the wheel. I had to have safety inspection on my 02 to...
  9. J

    Building for the Wife...

    I recently removed mine... Never seen my 03 get hot with standard electric fan and that included towing my daughters Saturn across town. One thing is for sure you knew you were at the max tow limit with respect to weight behind you.. my 02 had the heavy duty cooling and I gladly pulled it...
  10. J

    Air Conditioning Trouble/Strange Behavior

    Maybe some one with a/c background will confirm, but I think your gauge should go high when the compressor is off and back down to normal when the clutch is engaged, perhaps I thinking of how the gauge responds when the engine is not running and connected. Have you tried jumping the clutch...
  11. J

    What would you do from here?

    Looks like your in one of the Snow Belts.. My 03 spent it's life in southern U.S but now I am north of you. I recently had to let my 03 go and replaced it with an 02. The mileage was low around 95 K miles, however I really under estimated the work entailed with the front end, and rust. My...
  12. J

    Stripped Transmission Drain Plug

    Yep old school... Depending on how tight it is he could put the jeep up high on stands so there some room to move around safely. The freeze spray "forget what the exact name is" but it works really well, even better if you apply the torch "right after a 60 second freeze". The rapid expanding of...
  13. J

    Professional OBD2 Diagnostic Scan Tool

    Software on the laptop would be the way to go, not to mention the better written programs allow for actual programing and or tuning. The one I broke down and purchased does have live data on it for what it is worth. Really the only reason I purchased it was to read the Chrysler codes air bag...
  14. J

    Professional OBD2 Diagnostic Scan Tool

    I think it would be wise to acquire a scanner that can also pull the Chrylser Factory codes as well as ODB II generic codes. I recently purchased this Autel Scanner on e-bay for my 02 and my wife's 2012 Wrangler and it does indeed pull both types of code...
  15. J

    ABS light on, no cruise control, yes horn

    there is a ground lead behind the knee guard with a large eye bolt hole. Not exactly sure where it was originally bolted but I secured it next to the fuse block on the driver left side.
  16. J

    Transmission going bad? Tranny is acting weird.

    My work around for flushing the whole transmission was to first swap the main filter and then drive for a few days, then I used a suction pump to pump out about three quarts and put in three fresh quarts. You see where this is going. Keep doing this until you have replenished the total...
  17. J

    Trouble Starting When Warm?

    The coils might also be a consideration.
  18. J

    Pictures of my new-to-me '02

    How does the underside look? We purchased my 02 in the Fall of 2016. The paint look pretty good with the exception of the rusted rocker panels, however I underestimated the amount of work required on the rust and drive line. Mind you the mileage was low compared to my 03 around 95K and I...
  19. J

    Transmission going bad? Tranny is acting weird.

    Has the trans filter ever been replaced? Has the trans ever been flushed?
  20. J

    ABS light on, no cruise control, yes horn

    The drivers Squb cir 1 & 2 is the driver side air bag because it listed each cir. If you were to unplug the driver side airbag connector on the back of the clock spring it would indicate driver side squib open but it would not list cir 1 & 2 (at least this was the case with my 2002 jeep...
Top