Hi I have a bumper from ATH and it's fantastic. Morgan does great work, but it takes a long time as he's really busy. The factory bumper is no good for pushing. Its design to crumple and crunch up and absorb energy in the event of a collision etc.
Well after my daughter crashed the jeep, I decided I take it back and fix it. Now it's my daily driver and better than ever as it's paid for! I replaced the grill, upgraded all the lighting to led and got a custom fab bumper from Morgan@ ATH which is awesome quality! We then custom powder...
Hey friend. Install a nice new radiator and you should be good.
I had a 2003 with 187k miles. I had originally motor and could never flush it out clean enough. The gelling issues are real with the orange hoat and other antifreeze is real, but you have a a new motor with new pump etc , so...
This is what the top of the housing looked like on ours. You can see the adhesive or rubber pieces have become soft and sticky which is what causes the doors to become stuck or jammed
Sent from my SM-G930V using Tapatalk
This happened with our 2010 Jeep Liberty. Chances are it's your blend door housing. It's not repairable. You need to get a replacement and get the seal kit to go with it. If you're handy you can do this job in about four to five hours. Requires removal of most of the dash components. This...
Top off your coolant level in the radiator and in the overflow bottle. A few run cycles amd it should be air free and giving as much heat as possible. Do both the heater hoses going thru the firewall feel hot? If not, you probs have a heater core issue. If both hot , then it is a...
Here is a pic of my box looking at the top dampers.
You can see the dissolved rubber seal that gummed up the damper to get jammed. Not sure what causes this, but it also sticks to the other damper if it does move. Mine was stuck so only heat came out of defroster not on your feet.
Also, the...
You need to replace your whole distribution box. I just did this repair on my daughter's 2010 kk. The actuators work fine, but no heat. That box has 4 movable dampers. The bottom 2 are controlled by the temp knob (lower actuator)and either direct the air through or around the heater core...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.