Search results

  1. candpliberty

    project ideas?

    I have a hitch rack which works great but I want to raise it to about spare tire rim level, add another rack above the spare with (2) 5 gallon steel "jerry" cans on the bottom rack. I want to leave the spare alone, have the racks and gas cans swing on a frame mounted to the Reese receiver hitch...
  2. candpliberty

    HOW TO: change serpentine drive belt (3.7L)

    I just changed mine (06, 3.7, renegade). I used a ratchet/open combination wrench(the ratchet end) and used the A/C pulley as last as it was easier to work the belt over. I fed the new belt under the crank pulley, then worked the left and right sides over and under the pulleys until the belt was...
  3. candpliberty

    How do steel front bumpers mount?

    http://www.detoursusa.com/kjbackbone.php check the install instructions.
  4. candpliberty

    Renegade Roof Rail-weight limit

    I got a slightly used set of 06 Rennie rails for sale cheap! The freight would be more! Never been loaded missing the rubber gaskets.
  5. candpliberty

    NEED HELP...New Hidden Hitch

    I'm so glad we have a real hardware store near by. McFadden-Dale. No lawn chairs,bar b ques or 2x4's. 1" drive socket sets, more metric than Home Depot knows about SAE. 8.8, 10.9. Lengths as long as I have ever needed. Oh, and real counter help. Very, very cool!
  6. candpliberty

    wheel spacers with OME/Rancho lift

    I got a set sitting in my garage. I got them just in case and I got a good deal on them. I have no rubbing issues with my set up but I'm thinking I'll run them when I eventually get bigger, better off road tires, just for a wider stance. :D
  7. candpliberty

    How do i remove stickers

    I use a Harbor Freight heat gun. Sort of a hair dryer on steroids. Also great for shrink tubing. http://www.harborfreight.com/cpi/ctaf/Category.taf?CategoryID=107&pricetype
  8. candpliberty

    Does this look Normal??

    I was looking for a funky part on a 12 year old Chrysler Sebring and couldn't find decent parts diagrams so I looked and looked until I found this website eastern Europe somewhere. Thank goodness I book marked it! Good site for diagrams! All brands!
  9. candpliberty

    Does this look Normal??

    https://www.cyberjeep.com/prodinfo.asp?number=52088746AA
  10. candpliberty

    Does this look Normal??

    #13!
  11. candpliberty

    Does this look Normal??

    http://partmaster.com.ua/?action=catalog_show&cat=chrysler&t_id=2251&id_pic=17022
  12. candpliberty

    Does this look Normal??

    This is crazy but I had to go to a eastern European parts company to get a diagram! This is a translated page...
  13. candpliberty

    aussie locker install

    Thanks for clarifying, TJKJ. I always assumed that the Aussie locker was the ARB locker! chairshot.gif
  14. candpliberty

    aussie locker install

    It locks with a air switch controlled from the cab. Most use a little compressor. Go to aussielocker.com for all info.
  15. candpliberty

    aussie locker install

    yeah!
  16. candpliberty

    OME/Bilstein lift

    Right after I put the mediums in, my father in law surprised me with a smittybilt XR-8. He said I really needed it. Who am I to argue. We'll see how the mediums will handle a winch. :cool:
  17. candpliberty

    OME/Bilstein lift

    21 1/2" No more than 500 miles. I'm happy with mine. They feel very compliant. AAANNDDD the wife loves them!!!!:rolleyes:
  18. candpliberty

    OME/Bilstein lift

    If you want it level, I would at least put 3 clevis rings in. If you put an extra isolator in the back, I'd do clevis and top plate. If you want a rake, go with spring/shocls only. That's just my opinion after ome mediums, RRO a arms, clevis, plate, Ranchos and 2(total each side) isolators in...
  19. candpliberty

    jeep on cinder blocks?

    On the cheap, I would go to a construction site and ask for the cutoffs from 4x6, 4x8, or 4x10's. Railroad ties work but they're dirty and stinky. :eek:
  20. candpliberty

    Help, Please....

    I got a Reese from them and popped right in. Did you check part numbers? Call ehitch and see what they say.

Random media

IMG 20130420 202844
my step dad took it to work on day this is what happened i will get the dent fixed soon
20141123 170743
kj back view
check the dechromed hood badge - those kiwis won't know what to make of the Red Indian (I haven't seen an Inferno Red KJ in enzed).
542.jpg
image
100 3581
7DEBE0B0-A3A4-455C-9C17-D45F959850E1.jpeg

Latest posts

Members online

Total: 321 (members: 3, guests: 318)
Top