Search results

  1. LONGJEEPOWNER

    HAD TO PUT NEW CATALYTIC CONVERTS IN!

    I finally bit the bullet and installed 2 new catalytic converters in my 2010 Jeep Liberty. I bought the whole Y pipe with the 2 cats on it and installed them. Bought a set of Walkers from RA. They were OEM fit but still a pain to install. I had 4 new O2 sensors on the originals so I just...
  2. LONGJEEPOWNER

    Coil pack for 1-4 cylinder going bad!

    I replace the coil pack for cylinders 1-4 last May, now it has gone bad again! What would make it go bad so quick? Manufacturer? or something making it go bad?
  3. LONGJEEPOWNER

    DR SIDE UPPER CONTROL ARM.

    I changed the upper control arm on the passenger side but when I removed the nuts on the drivers side the bolt in the back of the control arm was frozen. Any ideas on how to remove it? It is a 2010 Jeep Liberty. The shop said they use a die grinder and cut slits on the control arm and bushing...
  4. LONGJEEPOWNER

    How Do You Remove The Rear Drivers Side Door Inner Panel?

    I have search you tube and everywhere else I could think of . I don't want to break the panel trying to remove it on my own.
  5. LONGJEEPOWNER

    FRONT STABILIZER BAR DIAMETER

    Does anybody know what diameter the stabilizer bar in a 2010 Liberty is? I have tried to order the bushings for it but they ask what the diameter is. It seem that they went to a different size since Liberty's have been around.
  6. LONGJEEPOWNER

    REAR DRIVESHAFT U JOINTS ?

    Does anyone know what u-joints to use on a 2010 jeep liberty sport 2wd? I have been going around and around with the local parts stores about the universal joints. They only show parts for a Dorman driveshaft but I don't think I have a Dorman driveshaft. The caps are of the same diameter...
  7. LONGJEEPOWNER

    Leaking Transmission Cooling Line

    Does anyone have a fix for a leaking transmission line where it connects to the cooling lines? The leak is where the connection between the tranny lines and cooling line meet. I have taken the e clip out and separated them but didn't see an o ring! I was going to try to replace the o ring to...
  8. LONGJEEPOWNER

    Metal or Plastic Impeller?

    I have to purchase a new water pump for my 2010 Jeep Liberty with a 3.7 cu.in. engine. While on line I see that they make the water pump with a plastic or metal impeller. So does the OEM part come in plastic or metal impeller? Which is the better water pump? Thanks in advance.
  9. LONGJEEPOWNER

    Relocating the oil filter on 2010 Libby.

    Does anybody know of a kit to relocate the oil filter on a 2010 3.7 cui Libby 2wd?
  10. LONGJEEPOWNER

    Does the steering wheel lock when key is removed

    I have a 2010 Jeep Liberty with a 3.7 and automatic tranny. When I put the Libby in park and turn off the Libby, remove the key my steering wheel never locks in place. Is this normal? It has been this way since I bought it.
  11. LONGJEEPOWNER

    How long does a PCV valve last before changing?

    I have a 2010 Liberty with the 3.7 engine. For the last year I have searched on the internet for the location of the PCV valve. Yesterday I headed out to 4 different auto stores who stated they had to order the PCV valve and didn't know where the location of the part on the engine!:emotions34...
  12. LONGJEEPOWNER

    Do they make a hd torque converter?

    I had my tranny fluid and filter changed today on my 2010 Libby with the 42RLE tranny. The fluid was kind of brown but not burnt. I was having it done as a regular maintenance on it. I had no trouble with it at all. The mechanic told me that the torque converter is coming in and out of lockup...
  13. LONGJEEPOWNER

    Switched from Summer to Winter tires! What happened?

    My summer tires are 225/75/16 and this year I acquired a set of studded 225/60/16 which I had mounted on a set of steel rims. I knew I would have a problem with the pressure sensors because there are none on the steel rims, but when I started to travel down the road my ESP, Traction Control, and...
  14. LONGJEEPOWNER

    Towing a KK with Tow Dolly

    Relocating and going to tow my 2010 Liberty Automatic 2WD with a tow dolly back up north (front wheels on dolly). Read the owners manual but am still confused. Do I have to drop the driveshaft or can I leave it in with the automatic tranny in neutral? If I take the driveshaft out will I lose...
  15. LONGJEEPOWNER

    Wiring color code under dash for 2010 Liberty

    Does anyone have any information on where the reverse wire is located under the dash or kick plate and what is the color code? I am installing an aftermarket Eclipse radio and it needs a reverse light input. I am still looking into the speed sensor input as well. Any info would be greatly...
  16. LONGJEEPOWNER

    2010 Jeep Liberty Reverse Wire and Speed Sensor Wire

    Does anyone have any information on where the reverse wire is located under the dash or kick plate and what is the color code? I am installing an aftermarket radio and it needs a reverse light input. I am still looking into the speed sensor input as well. Any info would be greatly appreciated...

Latest posts

Members online

Top