Search results

  1. Justin Holland

    Lifted '06 Renegade

    Still going strong 10k miles in. I am going to add some conduit nuts to space the clevis 3/4 inch and add an extra top spring isolator in the rear. Should give me a total of about 3 inches of lift and room to use 235/85R16 tires.
  2. Justin Holland

    Wiring harness

    I don't have a clue what it could be for. I'm going to investigate it further tomorrow.
  3. Justin Holland

    Wiring harness

    2006 Renegade trim package. No other options, other than the foglights and factory sunroof.
  4. Justin Holland

    Wiring harness

    I saw this while replacing my battery. I have no clue what this particular harness is called. It's located behind the battery and under the brake fluid reservoir.
  5. Justin Holland

    Eaton - Detroit locker

    So, if i can find a donor with 4.10s front and rear, what else would i have to change out to make it work with the 6spd ? Or is it bolt up and go ?
  6. Justin Holland

    Eaton - Detroit locker

    So would this open up anymore options for mine ? I just looked it up and apparently I have 3.55 ratio
  7. Justin Holland

    Eaton - Detroit locker

    I thougtht the 2006 gassers came with 3.73, no ?
  8. Justin Holland

    Lifted '06 Renegade

    245/70R16.
  9. Justin Holland

    Eaton - Detroit locker

    I want to start thinking about installing a locker. Rear and front. Can you confirm this is the correct part for either front or rear ? I also would appreciate it if the parts can be posted please
  10. Justin Holland

    Lifted '06 Renegade

    So now i got some new shoes on the pig. Changes the whole look of the vehicle. Got these on a bargain deal. Couldn't use the wheels from the deal, so they'll be up for sale shortly. I scored these Ko2's on American Racing wheels for $650. They have less than 500 miles on them. Before and after.
  11. Justin Holland

    245/70r16s Fit on Stock Rim

    Reviving an old post.... What I'm gathering here is that 245/70R16 tires will fit stock wheels on any KJ... depending on if it's lifted or sagged or what have you. Mine is lifted. Just bought that exact size tire and am planning on mounting them on my stock '06 Renegade wheels. Will that...
  12. Justin Holland

    Lifted '06 Renegade

    My experience with their customer service was absolutely horrible. They led me onto believe that they had the parts in stock and ready to go.... which they did not. Took almost 6 months to get here and they even forgot the bump stops i ordered and the covers for the shock piston. They didnt...
  13. Justin Holland

    Lifted '06 Renegade

    I don't quite understand the ins and outs of alignment terms and allowances... I only know that the jeep drives very smooth and has no pull in any direction.
  14. Justin Holland

    Lifted '06 Renegade

    Thanks Tom. I don't really have a choice about it now, but do know for next time.
  15. Justin Holland

    Lifted '06 Renegade

    They got the toe corrected perfect and the camber is out one half a degree, but the springs still need time and to be driven to settle. I didn't get a print out sheet. Maybe i can still go back and ssk them
  16. Justin Holland

    Lifted '06 Renegade

    Got it back from the alignment shop today and it drives very smooth !! Now to get some new shoes for the Shitbox
  17. Justin Holland

    Lifted '06 Renegade

    Well, I got the RRO kit installed. I'm a first timer for doing any heavy automotive work. I think I did fairly well, considering. Took me ~2 hours on Saturday morning to finish the rear axle. Then the work really began. I decided to start with the driver side and get that outta the way. Was...
  18. Justin Holland

    Required Fluid Types

    Assuming it's an automatic, you don't want to flush it out. Just drain, change filter and refill.
  19. Justin Holland

    Howling/rubbing sound from rear on right turns

    Could also be the dust shield on the back of the rotor. Look for wear marks on it and you can adjust/manipulate it to not touch the rotor
  20. Justin Holland

    New Guy introduction

    I already have UCA'S. just waiting on the Springs, shocks, isolators and bump stops.
Top