Prevoius owner is untruthful. A ball joint that dry after 12 months? I just did my lowers on an 06 and I used Moog problem solver. Just by vision...
It's a 90 degree v-6, that was hatched from the 4.7l. it is normal if you have no miss fire! I have a manual transmission and its really bad. It's...
Thanks for pictures! Keep us posted.
Knuckle touches outer hub, outer hub touches inner hub via roller ball bearings, inner hub touches cv axle splines. The bearings don't ride on air?
I think the metal used for the splines and threads are different from kk to kj. My 06 looks almost brand new and my 12 is starting corrode like...
My 2012 axle splines and nut is corroding in a similar way, but is not as bad as the picture.
If you can't get the axle splines out of hub, can you take the axle through the hub hole?
Nice! Always like the color inferno red.
If I remember correctly the original was a Delphi?
I have heard of unbolting motor mounts and raising motor 2-3 inches works?
Could be freezing up? Which would be low on freon.
My 12kk has a cold start rattle. I just thought it is normal. Now my 06kj only rattles when it sits for a week or more.
I serviced mine but I pumped the old fluid out through fill hole.
The first thing to do is verify it is Full.
I beleive the actuator is accessible from under the dash, with out dissassembly.
not true the chrysler scan tool (i believe the drb) can detect misfire counts per cylinder.
One option is to replace the cooler with a aftermarket one (same size) and leave the old one in place. I have not heard of any problems with the...
Volkswagon has a major problem with the plastic impeller water pumps. they crack off the bearing shaft and then proceed to warp the head.
No it doesn't! But i don't no what other brands bearings are like either. Since we don't have access to engineering specs and metallurgy reports,...
Says made in usa on the box.
Separate names with a comma.