Search results

  1. jcbll95

    jcbll95 02KJ

    some pics of the KJ on a local run
  2. jcbll95

    So I took the KJ in for the recall...

    I hade to drill out a lug after we bought our KJ, they were way to tight and i rounded off the lug after the socket slipped and that was the easiest way to get it off without wheel damage.
  3. jcbll95

    New Gears

    Unless you have the 2.4L 4cyl and live in WV then they still arnet low enough:mad:
  4. jcbll95

    Daystar parts, topplate shims, lcas

    going on ebay tomorrow
  5. jcbll95

    Daystar parts, topplate shims, lcas

    tbj best estimate i can get is about 35 by ups ground i also haqve a pic if you want it but just so you know the bushings will have to be replaced before use mag03kj 15 shipping via priority flat rate
  6. jcbll95

    Daystar parts, topplate shims, lcas

    I have some front and rear spacers from a Daystar 2.5" kit. $25 for the fronts, $50 for the rears steel top plate shims $20 for the pair Used lca both sides needs bushings BO buyer pays shipping All parts are going on Ebay Monday if not sold by then
  7. jcbll95

    OME/RSX and a spacer???

    i dont think that cutting your 2.5" spacers would work unless you have a way to reshape the inside of the spacer where it is shaped to fit over the strut. I got my .75 spacers from rusty http://http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RC-SP075-KJ&Category_Code=COILS
  8. jcbll95

    April: CLEAN Jeep

    Looks a little different now but it is the only "clean" pic I have. lol
  9. jcbll95

    lift install....home made frankie-lift

    That is the same set up you were asking if it would work in the start of this thread.
  10. jcbll95

    lift install....home made frankie-lift

    Here is the parts assembled:D Went together very nicely. looks good ill get a measurement after the alignment in aa few days.nana.gif
  11. jcbll95

    High mileage club

    Just a tick over 150k on our 02 sport
  12. jcbll95

    jcbll95 02KJ

    All parts for the new lift are in,as well as the replacement lower control arms. Now for the hard part, install starts tomorrow. Stupid frozen rusty lca bolts.
  13. jcbll95

    lift install....home made frankie-lift

    i should be able to tell you if this will work together this weekend is the weather stays nice. I have Rancho 17505 struts, OME 927 springs, .75 Rustys poly spacer, and gonna reuse my Daystar top plate. I cant see yet why it wount work as long as you use the daystar plates. The spacer looks the...
  14. jcbll95

    Rear spring isolators

    http://jeepinbyal.com/prod-Rear_coil_spring_isolator-668.aspx these i believe is what you want. or these http://www.partswebsite.com/wyckoffmopar/?i=1&model=832&make=131&year=2004&section=134&catid=30157&subcatid=31165&partid=0&type=parts&image=WD02535&imagecallout=5
  15. jcbll95

    Leaving The Forum

    I say that if folks get easily offended on the internet, then they need to be offended more often. If folks get all butthurt by something you say then they have the ability to leave. You have to take interweb fourms with a grain of salt, not everyone will agree with you, not everyone will like...
  16. jcbll95

    Seafoam?

    I do it a little different. I start by removing the brake booster vacuum hose and inserting a funnel. Then start the engine, and slowly pour about 1/3 the can in slowly while having a helper hold the revs at 1000 to 1200. After 1/3 of the can is poured in increase the revs till smoke clears then...
  17. jcbll95

    Gave the kids a bath

    I didnt realize how dirty the poor things wereWow1.gifSHOCKED.gif(biggthumpup)
  18. jcbll95

    Remounting My KC's

    i like it (woot)(biggthumpup)
  19. jcbll95

    Getting New Tires

    Not to be a smart ass but do you not rotate your tires?
  20. jcbll95

    Remounting My KC's

    How I mounted mine.

Latest posts

Members online

Top