Search results
-
-
So I took the KJ in for the recall...
I hade to drill out a lug after we bought our KJ, they were way to tight and i rounded off the lug after the socket slipped and that was the easiest way to get it off without wheel damage.- jcbll95
- Post #23
- Forum: KJ General Discussion
-
New Gears
Unless you have the 2.4L 4cyl and live in WV then they still arnet low enough:mad:- jcbll95
- Post #10
- Forum: KJ General Discussion
-
-
Daystar parts, topplate shims, lcas
tbj best estimate i can get is about 35 by ups ground i also haqve a pic if you want it but just so you know the bushings will have to be replaced before use mag03kj 15 shipping via priority flat rate- jcbll95
- Post #4
- Forum: For Sale Forum
-
Daystar parts, topplate shims, lcas
I have some front and rear spacers from a Daystar 2.5" kit. $25 for the fronts, $50 for the rears steel top plate shims $20 for the pair Used lca both sides needs bushings BO buyer pays shipping All parts are going on Ebay Monday if not sold by then- jcbll95
- Thread
- Replies: 6
- Forum: For Sale Forum
-
OME/RSX and a spacer???
i dont think that cutting your 2.5" spacers would work unless you have a way to reshape the inside of the spacer where it is shaped to fit over the strut. I got my .75 spacers from rusty http://http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Product_Code=RC-SP075-KJ&Category_Code=COILS- jcbll95
- Post #6
- Forum: Lift Kit Discussion
-
April: CLEAN Jeep
Looks a little different now but it is the only "clean" pic I have. lol- jcbll95
- Post #11
- Forum: JEEP pic of the month contest
-
lift install....home made frankie-lift
That is the same set up you were asking if it would work in the start of this thread.- jcbll95
- Post #15
- Forum: Lift Kit Discussion
-
lift install....home made frankie-lift
Here is the parts assembled:D Went together very nicely. looks good ill get a measurement after the alignment in aa few days.nana.gif- jcbll95
- Post #13
- Forum: Lift Kit Discussion
-
High mileage club
Just a tick over 150k on our 02 sport- jcbll95
- Post #35
- Forum: KJ General Discussion
-
jcbll95 02KJ
All parts for the new lift are in,as well as the replacement lower control arms. Now for the hard part, install starts tomorrow. Stupid frozen rusty lca bolts.- jcbll95
- Post #21
- Forum: Members' Journals
-
lift install....home made frankie-lift
i should be able to tell you if this will work together this weekend is the weather stays nice. I have Rancho 17505 struts, OME 927 springs, .75 Rustys poly spacer, and gonna reuse my Daystar top plate. I cant see yet why it wount work as long as you use the daystar plates. The spacer looks the...- jcbll95
- Post #8
- Forum: Lift Kit Discussion
-
Rear spring isolators
http://jeepinbyal.com/prod-Rear_coil_spring_isolator-668.aspx these i believe is what you want. or these http://www.partswebsite.com/wyckoffmopar/?i=1&model=832&make=131&year=2004§ion=134&catid=30157&subcatid=31165&partid=0&type=parts&image=WD02535&imagecallout=5- jcbll95
- Post #2
- Forum: KJ General Discussion
-
Leaving The Forum
I say that if folks get easily offended on the internet, then they need to be offended more often. If folks get all butthurt by something you say then they have the ability to leave. You have to take interweb fourms with a grain of salt, not everyone will agree with you, not everyone will like...- jcbll95
- Post #10
- Forum: KJ General Discussion
-
Seafoam?
I do it a little different. I start by removing the brake booster vacuum hose and inserting a funnel. Then start the engine, and slowly pour about 1/3 the can in slowly while having a helper hold the revs at 1000 to 1200. After 1/3 of the can is poured in increase the revs till smoke clears then...- jcbll95
- Post #42
- Forum: KJ General Discussion
-
Gave the kids a bath
I didnt realize how dirty the poor things wereWow1.gifSHOCKED.gif(biggthumpup)- jcbll95
- Thread
- Replies: 1
- Forum: Post Your Liberty Pictures
-
-
Getting New Tires
Not to be a smart ass but do you not rotate your tires?- jcbll95
- Post #5
- Forum: Tires / Wheels
-
