Search results
-
-
New CB!
I had a little wil but I rand into an issue with the set screw stripped out and you have to buy a new base. Well I bought a Wilson 1000 now and things are better. I comes off for parking garages so no need to move the magnet base. I used the magnet from the Little Wil after it broke and used it...- jinstall
- Post #5
- Forum: Electronics
-
Fukken FAQ!
It is ok, people ask me why I spell Nuerburgring wrong all the time.- jinstall
- Post #4
- Forum: Fukken Wax
-
Fukken FAQ!
Just FYI if you are going to spell your brands name without the Umlaut. From Wiki: Umlauts See also: Umlaut (diacritic) Although the diacritic letters represent distinct sounds in German phonology, they are almost universally not considered to be part of the alphabet. Almost all German...- jinstall
- Post #2
- Forum: Fukken Wax
-
the new daily (700WHP+)
This might be interesting to watch as well. When would you plan on doing it?- jinstall
- Post #12
- Forum: Introductions
-
-
the new daily (700WHP+)
I would like to see that car do some laps at Summit Point instead.- jinstall
- Post #8
- Forum: Introductions
-
HOW TO: Install a Frankenlift *Lots of Pictures* COMPLETE!
I can only talk about the OME 2.5" lift and the H&R 1.5" lifts and both of these were fine without taking any of the joints loose. The only real issue was the rear on the OME lift and had to use tranny jack stands to get the rear spring in. Taking our time and waiting for odds and ends and... -
HOW TO: Install a Frankenlift *Lots of Pictures* COMPLETE!
I would have to go and look again on that one. If you clean everything up and you get yourself a cheap micrometer, you can answer this yourself. It is hard to remeber all the sizes and I think you are refering to the nut on the lower shock mount that connects to the LCA. -
HOW TO: Install a Frankenlift *Lots of Pictures* COMPLETE!
8mm, 10mm, 15mm, 18mm, 19mm I think it was. 5mm allen wrench big screwdriver some need to be deep, I always have a complete set of tools with me though. I would recomend using all the bumpstops that come with it, I have already found out that the rear will rub in a bad way if your tires... -
HOW TO: Install a Frankenlift *Lots of Pictures* COMPLETE!
I am not sure why everyone says you have to seperate the ball joints, I have done 2 lifts now WITHOUT removing the ball joints of the tire rods or the rear sway bar. -
CHEAP!!! MT/R, Spidertrax and Rims(10)
Yes I have center caps for 4 maybe for 5. Only one tire. I am heading to Germany and will be back on the 28th of Sept. 2 Rims and on tire left only.- jinstall
- Post #8
- Forum: For Sale Forum
-
CHEAP!!! MT/R, Spidertrax and Rims(10)
Bump for the week. If not sold by Labor Day they are going on Ebay.- jinstall
- Post #6
- Forum: For Sale Forum
-
CHEAP!!! MT/R, Spidertrax and Rims(10)
19lbs each from 22060 $52 each for USPS not sure on UPS. UPS Ground is $54 for 2 rims.- jinstall
- Post #5
- Forum: For Sale Forum
-
-
CHEAP!!! MT/R, Spidertrax and Rims(10)
CHEAP!!! MT/R and Rims(10) I have 10, yes TEN 16X7 OEM KJ rims for sale. I think $30 each plus shipping would be fair. Location is Manassas, Virginia. Set 1 from my Jeep: By jinstall at 2010-08-14 Set 2 from the basement: By jinstall at 2010-08-14 Goodyear 245/75/16 MT/R: By...- jinstall
- Thread
- Replies: 7
- Forum: For Sale Forum
-
Component Install
Be advised Infinity is known to require power to make them work, b0th home and mobile speaker systems. I haev been using their stuff for close to 20 years and they have always LOVED power.- jinstall
- Post #3
- Forum: Electronics
-
component speakers vs 3 way
I run these up front. Focla 165 V Editions I have never looked back. I am not real happy with the placement in the doors but it works. I used the OEM mount for these as they slipped right in with no issues and used heavy auto adhesive to secure them to the OEM mounts. After drying, 3...- jinstall
- Post #16
- Forum: Electronics
-
Breath of life into the region. M&G!
OK so now it is Aug, where the hell are you all? I am not sure about weekends as I am booked every weekend in August to work. Hey Chris I got a kegerator and 15 gallons of German beer now!!!!- jinstall
- Post #12
- Forum: Mid Atlantic
-
Spacers on a suspension lift?
1.5" H&R lift, 1.25" Spidertraxs on OEM 16X7 with 245/70/16 with a SLIGHT rub.- jinstall
- Post #17
- Forum: Lift Kit Discussion
