Search results
-
E
Timing Chain tensioner Question
I have a clicking sound from the engine and found a YouTube showing the plate was removed because it was restricting oil flow . The tensioner was bouncing up and down making the clock, when the plate was removed the tensioner was applying the proper pressure! If you want to see the video I can...- eagle1one
- Post #5
- Forum: KK General Discussion
-
E
Differential vs. Transmission Speed Sensors
Did you check the wiring with a multimeter for continuity? The reason for the question is that I have a 205 Liberty and my speed sensor stopped. My son fixed one of the wires before the connector it was broken. It worked for a while then with bumps it would go off and then on until it stopped.- eagle1one
- Post #8
- Forum: KJ General Discussion
-
E
What did you do to your jeep today?
Last november I purchased a jeep Liberety 2005 to use to go up to the snow removal company. need a 4wd to get there is a storm We started ( my son and I ) and it ran no codes ( removing the battery erases the codes ) that is what he did. it was stored ( of road no tags ) the owner said, so we...- eagle1one
- Post #26,440
- Forum: KJ General Discussion
-
E
2010 Liberty P0300, P0152, exhaust leak **HELP**
Also I changed one on the passenger side catalytic ( one before the perverter and one after the perverter) on the perverter closer to the exhaust manifold is the one I changed. It controled the injectors on the passenger side You can check this out by unplugging the injectors one by one and...- eagle1one
- Post #4
- Forum: KK General Discussion
-
E
2010 Liberty P0300, P0152, exhaust leak **HELP**
Your P0152 is an Oxygen sensor defective. It controls the fuel injectors on that side of the engine through the computer. You have two banks, Bank 1 & Bank 2 and you have 4 O2 sensor which are the same part# Hope this helps!- eagle1one
- Post #2
- Forum: KK General Discussion
