2002 coil pack connector

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

rigid

Full Access Member
Joined
Sep 18, 2016
Messages
108
Reaction score
9
Location
united states
Can anyone help with a part number or source for the pigtail connector to the coil pack? Apparently a mouse liked the insulation and shredded one of mine. The local parts store says this is a 45$ part. Mine is a 2 wire connector on a 3.7

Thank you for your help
 

rigid

Full Access Member
Joined
Sep 18, 2016
Messages
108
Reaction score
9
Location
united states
This is what it is.
 

Attachments

  • 20230523_204243.jpg
    20230523_204243.jpg
    122.8 KB · Views: 9
  • 20230523_204236.jpg
    20230523_204236.jpg
    243.6 KB · Views: 9

DadOSix

Full Access Member
Joined
May 20, 2020
Messages
672
Reaction score
359
Location
Cumberland, MD.
local parts yard.

don’t limit yourself to just jeeps. most any mopar product of the samed age uses this connector.

i got a handful from a durango a few years back.

also - since your plug does not seem damaged, you can release the pins from the connector and solder a length of same gauge wire to the pin and make a nice repair further back the harness.

it uses a little paper clip sized pin into the square hole to release the pin.

cheap and simple if you or a buddy can solder.

and do not use plumbing solder. electronic 70/30 rosin core or similar is fine. the flux in plumbing solder does not play well in electrical connections
 

Boueux

Active Member
Joined
Dec 28, 2023
Messages
121
Reaction score
60
Top