ABS module rebuild

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Raybird2112

New Member
Joined
Dec 20, 2020
Messages
12
Reaction score
1
I have a faulty abs control module on my 2006 Jeep Liberty Sport. The part is discontinued but I found a company who can rebuild them. Anyone done this before with success? Anyone have any other ideas?
 

LibertyTC

Well-Known Member
Staff member
Moderator
Joined
Oct 24, 2008
Messages
9,096
Reaction score
1,765
Location
B.C. Canada
Did you have a shop scan for stored ABS codes? If so what are the codes?
Just curious, how much to have module re-built?
My 2004 has no abs or traction control. I'm glad I kept it simple.
I'm not sure if this will help however here are some threads regarding the module etc.

LINK Below:
https://www.jeepkj.com/search/362702/?q=abs+control+module&o=relevance
 

Raybird2112

New Member
Joined
Dec 20, 2020
Messages
12
Reaction score
1
Did you have a shop scan for stored ABS codes? If so what are the codes?
Just curious, how much to have module re-built?
My 2004 has no abs or traction control. I'm glad I kept it simple.
I'm not sure if this will help however here are some threads regarding the module etc.

LINK Below:
https://www.jeepkj.com/search/362702/?q=abs+control+module&o=relevance
Yes, I had a shop look at my Liberty. They traced it to a bad abs module. I found a company who is going to rebuild it for $400. All the abs lights were on my dash and it gave the c1020 code.
 

blackhawk

Full Access Member
Joined
Apr 3, 2013
Messages
217
Reaction score
21
Location
Venezuela
Regarding c1020 code it can refer to a bad rear wheel sensor. To check if all of they are apparently good you must check if all of them are sensed with scanner. If not, you must check if the 12 voltage is present in every connector, just to check if the harness is in good order
 

HeavyJohnny

New Member
Joined
Jan 31, 2022
Messages
1
Reaction score
0
I have a faulty abs control module on my 2006 Jeep Liberty Sport. The part is discontinued but I found a company who can rebuild them. Anyone done this before with success? Anyone have any other ideas?
Do you have a link to the shop that rebuilds them? Mine took a shit this week too.
 
Top