8.25 DTT Carrier Install Specs –Ring Bolts, Preload, Backlash, Bearing Caps

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JeepinSteve

New Member
Joined
Oct 27, 2021
Messages
27
Reaction score
23
Hello All. I’m installing a Detroit TrueTrac in the rear 8.25 on my 2004 KJ. I’m having a difficult time finding the torque specs for the carrier. Unfortunately the Chilton manual doesn’t have any information about installing a carrier. After looking around on the web, it seems that the torque specs people are using are all over the place.

I know many people on this forum are running a DTT in the rear with no issues. Can you please list the torque specs you used for the ring bolts, preload, backlash, and bearing caps.

Based on my research, the best I can find:
Ring bolts: 55 lb-ft
Preload: 75 lb-ft
Backlash: 6-10
Bearing caps: 60 lb-ft

Thanks for the info,

Steve
 

Latest posts

Members online

Top