What did you do to your jeep today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

read6737

Member
Joined
Mar 28, 2022
Messages
28
Reaction score
39
Trying to replace a drivers side rear light cluster.
What a pain to put the screws back in
Have an 05 cannot find a light cluster cheap with a fog light bulb holder in it.
over 270.00 euros a piece plus post. what a rip off. So on to ebay gor a cheap one for an 04 with out bulb holder for fog light for 66.00 inc post.

So will now need to rewire connections easy job I an an electrician after all, fit another holder after drilling the back cover to take it, Using one of old work van. Oh and the 2 connector blocks are different.
What a pain but then I saved over 200 euros SO NOT really complaining.

Hole done with a step drill and wiring tomorrow as it is PIXXXXX with rain here.
 

Attachments

  • WhatsApp Image 2022-04-23 at 8.21.07 PM.jpeg
    WhatsApp Image 2022-04-23 at 8.21.07 PM.jpeg
    147.8 KB · Views: 7
Last edited:

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
Trying to replace a drivers side rear light cluster.
What a pain to put the screws back in
Have an 05 cannot find a light cluster cheap with a fog light bulb holder in it.
over 270.00 euros a piece plus post. what a rip off. So on to ebay gor a cheap one for an 04 with out bulb holder for fog light for 66.00 inc post.

So will now need to rewire connections easy job I an an electrician after all, fit another holder after drilling the back cover to take it, Using one of old work van. Oh and the 2 connector blocks are different.
What a pain but then I saved over 200 euros SO NOT really complaining.

Hole done with a step drill and wiring tomorrow as it is PIXXXXX with rain here.
1/4 inch 6 inch extension on your socket and they are very easy to install
 

read6737

Member
Joined
Mar 28, 2022
Messages
28
Reaction score
39
1/4 inch 6 inch extension on your socket and they are very easy to install
going to replace with normal Philips screws with a magnetic bit. it is more putting them back the problem top wont line up properly plaster board one at that fixed that and a better quality one as well.
 
Last edited:

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,358
Reaction score
3,164
Location
Bellevue NE
Shocked a few folks at Tuttle Creek ORV park today. Bert went almost everywhere the wranglers did. Only had to skip two obstacles- both meter high ledges. Also had a pop up thunderstorm turn the trails to soup almost instantly, so things got a little gnarly for a bit as we were down in the forest trails…yeah, A couple of trees tried to hitch a ride….
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Johnny O

Just hangin' out.
Joined
Apr 29, 2021
Messages
2,358
Reaction score
3,164
Location
Bellevue NE
Sheared a skid plate bolt. Skid Row for the win!
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

nohitter64

Full Access Member
Joined
Sep 18, 2011
Messages
275
Reaction score
122
Location
Annapolis, MD
Roof load bar iteration 423..bicycle handlebar clamps and varying ***** lengths for a solid clamp. We'll see how long I keep it...
 

Attachments

  • 20220424_163710.jpg
    20220424_163710.jpg
    431.6 KB · Views: 16
  • 20220424_163717.jpg
    20220424_163717.jpg
    439.1 KB · Views: 15
  • 20220424_163724.jpg
    20220424_163724.jpg
    454.3 KB · Views: 15

Latest posts

Members online

Top