OEM roof lights hardware

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Jul 14, 2018
Messages
62
Reaction score
7
Location
Missouri
The local 4x4 parts place gave me an estimate of over $600 to install the lights.
So I am going to do it myself.
I need to know the size of screws,nuts,bolts,rivets,washers,whatever needed...?
 
Joined
Jul 14, 2018
Messages
62
Reaction score
7
Location
Missouri
Never mind
I am not going to risk the rain and rust
Any one want to buy a OEM Jeep Liberty Renegade roof light?
 
Joined
Jul 14, 2018
Messages
62
Reaction score
7
Location
Missouri
Been thinking of installing a roof basket and than attaching lights to that.Yeah,it will probably require drilling,but I'd rather have it be only 1 hole,where as with the OEM lights,it would be at least 4 holes drilled,plus one hole cut(for the wiring).
 

tommudd

Moderator
Staff member
Moderator
Joined
Jul 14, 2005
Messages
22,456
Reaction score
3,642
Location
Southeastern Ohio
First how many lights will you have up there
All on same switch or two or more switches ?
Next ground can go to one of the bolts that hold rack on, grounds good there
Next the weather stripping that run up the side of the pillar beside the windshield has small screws hidden in behind, remove those , run wiring in behind that weatherstripping , up to the area at rear of door, if done right no wiring shows and all works well

But I've only done 6-7 like that so more than likely to some on here I'm doing it wrong LOL
 
Joined
Jul 14, 2018
Messages
62
Reaction score
7
Location
Missouri
Is there any thing I can use to keep the wiring from coming uncovered by the weather stripping?
You must be registered for see images attach


And than to get the wiring in to the vehicle(so i can connect the switch),i go through the firewall?
 
Joined
Jul 14, 2018
Messages
62
Reaction score
7
Location
Missouri
Is there any thing I can use to keep the wiring from coming uncovered by the weather stripping?
You must be registered for see images attach


And than to get the wiring in to the vehicle(so i can connect the switch),i go through the firewall?

done

no hardware needed

You must be registered for see images attach
 

Latest posts

Members online

Top