KK - Passenger Heater Blend Door Actuator

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TheCanadian

Member
Joined
Jul 30, 2019
Messages
92
Reaction score
3
Location
New Brunswick,Canada
So I'm trying to find this part without breaking the bank since I'm a student. Would you guys recommend getting this part from a wrecker? also would the old gen liberty's have the same one?
 

lfhoward

Well-Known Member
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,242
Reaction score
2,425
Location
Philadelphia, PA
Which part? The air distribution box? If that’s what you mean, no, I wouldn’t get it from a pull-a-part junkyard because it would be so much trouble to take another dash apart to get to it. Also, you want one with new seals that are not going to degrade and get stuck in a couple of years so you have to do the job all over again.
If you are referring to the actuator motors, yes, those are pretty easy to pull. All 3 are the same part number if I remember correctly.
 

TheCanadian

Member
Joined
Jul 30, 2019
Messages
92
Reaction score
3
Location
New Brunswick,Canada
Which part? The air distribution box? If that’s what you mean, no, I wouldn’t get it from a pull-a-part junkyard because it would be so much trouble to take another dash apart to get to it. Also, you want one with new seals that are not going to degrade and get stuck in a couple of years so you have to do the job all over again.
If you are referring to the actuator motors, yes, those are pretty easy to pull. All 3 are the same part number if I remember correctly.


Sounds good, I'll have to shop around to get the lowest price I guess for the distribution box
 

lfhoward

Well-Known Member
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,242
Reaction score
2,425
Location
Philadelphia, PA
Sounds good, I'll have to shop around to get the lowest price I guess for the distribution box
Put a new heater core in it while you have the box out of the dash. Even if your current heater core seems fine, by now it’s at least 7 years old if you have a 2012 and spending some additional cash now will save you tons of work or $$$ in the future.
 

TheCanadian

Member
Joined
Jul 30, 2019
Messages
92
Reaction score
3
Location
New Brunswick,Canada
Put a new heater core in it while you have the box out of the dash. Even if your current heater core seems fine, by now it’s at least 7 years old if you have a 2012 and spending some additional cash now will save you tons of work or $$$ in the future.


I've gotten my heater core flushed before and it pumped more heat.

I have to get the radiator fluid changed since its almost a copper color and I'm sure it's clogging the heater core once again. There's a few shops that do it mechanically which is perfect.
 

KKinTexas

Member
Joined
Jan 11, 2018
Messages
30
Reaction score
10
Location
US
I’m sorry to say so, but yes, busted gears. See this one minute YouTube video for an explanation of why/how this happens. The rubber gasket on the door degrades and melts into sticky goo. The mode door gets stuck, and when the actuator tries to move it, the plastic gears explode.

xc_hide_links_from_guests_guests_error_hide_media
Totally agree with this analysis. Rubber gasket glues everything together and the door won't move. Need to replace the whole box assembly if that happens
 

KKinTexas

Member
Joined
Jan 11, 2018
Messages
30
Reaction score
10
Location
US
Btw- do get a new distribution box, seal set and heater core as others suggested. You only want to do this job once. It will take you about 13 hours start to finish. More time than money really. But you can do it yourself.
 

mrt100171

New Member
Joined
Jan 23, 2024
Messages
2
Reaction score
2
Location
Mont Vernon, NH
Btw- do get a new distribution box, seal set and heater core as others suggested. You only want to do this job once. It will take you about 13 hours start to finish. More time than money really. But you can do it yourself.
The forums and lots of knowledgeable members are quite helpful. I have already ordered the replacement box, gasket kit, and a new heater core. It should all be here in a week or so.
All of my research tells me the same thing, it was just a simple question of money. In today's dollars, the parts cost me slightly more than $300. The labor cost involved at a garage/dealer is what kills you. I don't have that kind of money to spend, so I will punish myself in all sorts of ways and get this changed out.

13 hours-I think it will take me quite a bit longer. Likely a couple of days. Fortunately, I have every imaginable tool available (for backhoe maintenance).
 

lfhoward

Well-Known Member
KJ Supporting Member
Joined
Dec 9, 2012
Messages
2,242
Reaction score
2,425
Location
Philadelphia, PA
Good for you. This can be done in under 13 hours if you take your time, stay organized, take breaks, and label everything. Good luck from someone who has been there.
 

mrt100171

New Member
Joined
Jan 23, 2024
Messages
2
Reaction score
2
Location
Mont Vernon, NH
Well the replacement unit has arrived, as has the heater core. Just waiting on the gasket set.

What I am wondering now...might there be something immensely clever that can be done so that the new one never gets sticky-door syndrome?
I am assuming that it is the adhesive on the gasket that does it. I just can't believe that they have not adapted a new adhesive formula or something. I mean I would rather use a high-temp silicone or the like.
Maybe they want them replaced every 6-10 years or so. It is not like there isn't a relatively steady stream of replacement parts needed for any Jeep.

On a positive note, I can find a nice place to install my new UltraGauge. I feel naked without an external temperature display in the winter. I was always spoiled with Grand Cherokees in the past.
 

Latest posts

Members online

No members online now.
Top