Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
New JBA upper control arms, all new bushings installed in lower control arms, new bushings on sway bar. The squeak is driving me crazy. Already greased sway bar bushings. Suggestions
most likely the front sway bar.
Found it. The squeak is coming from the top of the strut assembly. I guess I will be pulling them and verifying the nuts are tight on to struts.
Have a front end squeek, it is usually when the car shifts around, I greased all the suspension components, from the top of thr strut to the lower ball joint with white lithium grease. It help a little, and for a little while. I changed the sway bar bushings, and greased them well, so its not that . I am waiting for the sway bar end links, I have all new struts, shocks, springs, ball joints, new upper control arm, becsuse the ball joint and control arm are one. I just instslled a rusty budget lift kit, rubber spacers in the rear and OTT strut spacer in the front. The sqweek started right on the test drive. Everything is tight, like impact gun tight. The ball joints are torqued to specs. Thr steering tie rod is torqued also. The clevis bracket, is impact gun tight, the upper control arm is impact tight too. I broke the lower sway bar end washer, and got a similar one from the hardware store. I think its the washer, any one have a similar problem. Anyone have a solution. Or maybe a way to remedy it. Thank you all. God bless. FM.
Found it. The squeak is coming from the top of the strut assembly. I guess I will be pulling them and verifying the nuts are tight on to struts.