transfer case swap

2006 Jeep Liberty 3.7/auto. I'm wondering about the possibility of swapping an NP242 in place of the original NP231. I was looking at some online parts diagrams and see that the shifters are different, but wasn't able to determine much else. I also did not come up with anything on a general search to see if anyone else had done this swap or attempted it. Any words of wisdom are appreciated!

You will need....................

T-case
Shifter assembly
Front and rear driveshafts

Possible t-case mount and rear trans crossmember,can't exactly remember if they are the same between the 231 and 242.

Thank you, sir!

NAPA only lists one front shaft for an '06 Libby. They don't list it as only fitting a specific t-case or anything. Any ideas on that? Just trying to get a general idea of parts cost.